Dell A940 manual Scanning photos, Press Select Software, Click See More Scan Settings

w w w . d e l l . c o m / s u p p l i e s s u p p o r t . d e l l . c o m

Scanning

You can scan using your operator panel and software.

First, load your document. For help, see page 17.

Using the operator panel:	Using the printer software
1 Make sure your printer is on.	1 Make sure your computer and your
2 Press Select Software.	printer are on.
3 The scan destination that you last	2 Open the Dell All-In-One Center. For
selected (or the factory default)	help, see page 7.
displays.	The All-In-One Main Page appears.
4 Press + to scroll through the list of	3 Click Preview Now to see your
scan destinations.	scanned image.
5 When your preferred scan destination	4 Adjust the dotted lines to fit around
displays, press Select.	the part of the image you want to
6 Press Scan to begin a scan job using	print.
the current settings.	5 From the Send scanned image to:
	drop down box, select your scan
	destination.
	To further customize your scan job,
	click See More Scan Settings.
	6 When you are finished customizing
	your image, click Scan Now.

NOTE: Make sure the upper left corner of the front of the photo aligns with the arrow.

Scanning photos

1Place your photo on the scanner glass. For help, see page 17.

2Open the Dell All-In-One Center. For help, see page 7.

3Click Preview Now.

4Adjust the dotted lines to fit around the portion of the image you want to print.

5Select your scan destination from the drop-down box.

6When you are finished customizing your image, click Scan Now.

7When your document has finished processing, it will open in the program you chose.

26 Using your printer