Pptp

D. Click the Apply button to save the settings, or click the Cancel button to clear the settings and start over. When you are finished, proceed to step 6.

If you are using a PPTP connection, check with your ISP for the necessary setup information.

After you have entered your setup information, click the Apply button to save the settings, or click the Cancel button to clear the settings and start over. When you are finished, proceed to step 6.

6.To configure the Router for your wireless network(s), perform these steps:

A.If you have Wireless-G and Wireless-B devices in your network, then keep the default Mode setting, 11b+g. If you have only Wireless-G devices, select 11g Only. If you want to disable wireless networking, select Disable.

B.Customize the SSID and Channel settings as needed. For added security, you should change the default SSID (CNET_Wireless) to a unique name. Then click the Apply button to save your changes. For more information, refer to “Chapter 6: The Router’s Web-based Utility.”

C.To enable Wireless encryption function (recommended), click the Enable button and click “Configure Security” button.