CNet Technology CWR-800 manual

Page 33

Restore Factory Defaults Click the Yes button to reset all configuration settings to their default values, and then click the Apply button. Any settings you have saved will be lost when the default settings are restored. This feature is disabled by default.

Firmware Upgrade New firmware versions are posted at www.cnet.com.tw and can be downloaded for free. If the Router already works well, there’s no need to download a newer firmware version, unless that version has a new feature that you want to use. (To learn about any new firmware with new features, visit http://www.cnet.com.tw)

To upgrade the Router’s firmware:

1.Download the firmware upgrade file from www.cnet.com.tw , and extract the file using a file archive utility such as WinZip.

2.Click the Upgrade button.

3.On the Upgrade Firmware screen click the Browse button to find the firmware upgrade file you extracted.

4.Double-click the firmware upgrade file you extracted.

5.Click the Upgrade button, and follow the on-screen instructions. Remote Management This feature allows you to manage your Router from a remote location, via the Internet. To disable this feature, keep the default setting,

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Broadband Router Table of Contents Introduction What’s an IP Address? Dhcp Dynamic Host Configuration Protocol ServersStatic IP Addresses Dynamic IP AddressesPage Getting to Know the CNet Wireless-G Router Over that port LAN IndicatorsConnect the Router Page Page Configure the PCs Go to Configure the Router’s Basic Settings Go to Configure the Router’s Basic Settings Go to Configure the Router’s Basic Settings Configure the Router’s Basic Settings Page Enter the Default Gateway Dhcp Auto ConfigStatic IP Address Enter the Internet IP AddressPPPoE Pptp Page Router’s Web-based Utility Click More Info InternetDhcp Auto Config Static IP Address PPPoE Pptp Wireless WEP Wired Equivalent Privacy Wireless SecuritySetting WPA Radius WPA Wi-Fi Protected Access Setting WEP Pre-Shared KeyPage Page Page Page Page Click Properties. You will see the following Click Setting Page Page WAN Page Page Page Page Access Control Page Port Mapping Snmp Application External Port TCP Protocol UDP ProtocolPage Click the Delete This Entry button Dynamic DNS Page Power LED IndicatorsTransmit Power Dimensions
Top Page Image Contents