Citizen Systems CLP-8301 user manual Changing Menu Values, = Example changing the print density

Chapter 5 Power ON and Using the Control Panel

5.5 Changing Menu Values

With a Menu Item displayed on the LCD (such as Print Speed, Darkness or Baud Rate), pressing the key allows you to adjust or select the Value of the Menu Item.

Theand printing position. If the used, then pressing the

keys are used to increase or decrease a Value, such as the print speed or Menu Item is an option that has a fixed set of values, such as the type of media

andkeys will cycle through the values in turn.

The action of thekey while you are changing a Value depends on the particular Menu Item:

·If the Menu Item is a Value pressing theorkey stores the value and returns to the previous Menu Item.

·If the Menu Item is an action, such as a test print or head check, pressing thekey

executes the action. Pressing thekey returns to the previous Menu Item without executing the action.

=Example: changing the print density

The best way to learn how the menu system works is to go through an example. In the example given here, the print density is changed to 15. The print density has been factory-set to 10. Follow the procedure below to change this. For more about the print density, see Chapter 6.

Group Menu:	*Page Setup
Menu Item:	Print Darkness
Value:	00 - 30 (Note: When language is DDP-N3, the maximum value is 20.)

Turn the power switch ON.

·The various system checks will be performed

·After the checks, the ‘READY’ display is shown on the LCD.

Pressto bring up the first Group Menu.

·‘* Page Setup’ will be displayed.

Show the Menu Items within the Page Setup menu.

·Pressto bring up the first Menu Item of the Page Setup menu ‘Printing Speed.’

READY

*Page Setup

Printing Speed

- 37 -