Citizen Systems CLP-8301 user manual Menu Mode Description

Chapter 6 Configuring Your Printer Using the Menus

6.8 Menu Mode Description

Group Menu	Menu Item	Default Value	Range of Values	Description
* Page Setup	Label Width	8.53in	3.00 - 8.64in	Set print label width.
		216.7mm	76.2 - 219.5mm
	Print Speed	04 IPS	02 - 04 IPS	¾
	Print Darkness	10	00 - 30*	*When language is DDP-N3, the
				maximum value is 20.
	Print Method	TT	DT / Direct Thermal	Set printing method.
			TT / Thermal Transfer
	Ribbon Torque	3	1 - 5	Set ribbon winding torque
	Continu. MediaLen	10.00in	0.25 - 40.00in	Set print label length
		254.0mm	6.4 - 1016.0mm
	Vertical Position	0.00in	- 1.00 - 1.00in	Adjust print start position.
		0.00mm	-25.4 - 25.4mm
	Horizont Shift	10.00in	- 1.00 - 1.00in	Adjust left-to-right position in dots.
		254.0mm	-25.4 - 25.4mm
* System Setup	Media Sensor	See Thru	See Thru	Select label sensor.
			Notch	See Thru: Transparent GAP sensor.
			Reflect White	Notch: Transparent HOLE sensor.
			Reflect Blue	Reflect White: Reflective White base
			None	sensor.
				Reflect Blue: Reflective Blue base
				sensor.
				None: No use of sensor (continuous
				paper)
	Sensor Monitor		x.xV adc	Monitor media sensor sensing level.
		¾		When None, See Thru (GAP) sensor
				sensing level is monitored.
	Sensor Level	1.5V/1.7V	0.0V - 3.3V	Set sensor threshold.
	Top Form	Yes	Yes	Select Top-Of-Form (TOF) sensing.
			No	Printer will feed to top-of-form before
				first print after power on.
	Buzzer Select	Exec/Err	Exec/Err	Select condition for buzzer.
			All	Exec/Err: Sounds when setting and
			Error	execution are completed or error
			Key	occurs.
			None	All: Sounds in all situations.
				Error: Sounds only in error.
				Key: Sounds in key operation.
				None: No sound.
	Metric/Inch	Inch	Inch	Set basic unit of measurement to
			mm	millimeters or inches.
	Print Res. DPI	300	300DPI(12 DPmm)	Set print resolution.
	(Print Res. DPmm)		150DPI(6 DPmm)	Values in parentheses are in metric
				system.
	AutoCal Mode			Perform sensor calibration.
	MaxMedia Length	10.00in	1.00 - 50.00in	Set GAP length.
		250.0mm	25.4mm - 1270.0mm

(continued)

- 48 -