Chicago Pneumatic CS7000 manual Enclosure Interior, Connector

6159939130 CS7000 Controller Hardware Overview Manual

I/O Connector

The 19-position remote I/O connector provides the interface between external control/monitoring devices and the internal control electronics. CP techmotive accessories, such as socketrays, are connected here.

The mating connector for this port is a 14-shell, 19-pin, strain relief (SR) connector

(part number 23-10-5200). The mating connector enables connection of your own remote control and/or monitoring devices, such as external annunciator lamps or remote cycle-on contacts. Refer to I/O Wiring in Chapter 3. Installing the CS7000 Controller for pinout details.

Enclosure Interior

The enclosure interior for the CS7000 Controller includes the following components and sub- components:

•Sub-panel, that includes:

•Disconnect switch

•Power supply (24 VDC)

•Circuit breaker/ Fuses

•Ground fault circuit interrupter (GFCI)

•Backplane, that includes:

•Address switch

•DCM fuse (internal DCM power)

•I/O power (24 VDC) fuses

•TCM, that includes:

•DCM control card

•Servo

•Communications Control Module (CCM) optionally

See Figure 2-5 on page 2-7 and Figure 2-6 on page 2-8.

Page 2-6 39-30-41365