Chicago Pneumatic CS7000 Technical Information, Replacement Parts, Cleaning the Enclosure Window

Chapter 4. Technical Information

4. Technical Information

Maintenance of the CS7000 Controller consists of replacing fuses and cleaning the enclosure window.

Replacement Parts

If, at any time, you need to replace or order new parts for your CS7000 Controller.

	Table 4-1.	Replacement Parts
Qty.	Description	Part Number
1	50A TCM GEN2	49-4102-015000
1	+24V DC Power Supply	12-20-5007
1	Fuse 1A SB, Littelfuse 39001 5x20 mm	13-10-61001
2	Fuse 20A, MDA-20	13-10-0555

NOTE:	All part numbers used in Table 4-1 are CP techmotive part
?	numbers unless otherwise specified.

Cleaning the Enclosure Window

Use only water-based cleaners to clean the plastic window. Other solvents may damage the window.

Assembly Drawings

Assembly and wiring diagrams are available for the CS7000 Controller. To request an assembly or wiring diagram, contact the CP techmotive Technical Service Department. To contact CP techmotive, refer to Contact Information next.

December 2005 4-1