Chaparral FS2620R manual Understanding the LED Status Lights, To make the host FC connection

FS2620R Rack Model User’s Guide

To make the host FC connection:

1Connect the Fibre Channel cables to the router and the host computer/hub/ switch.

You can use one or both FC connections. If only one connection is used, disable the unused FC connection. For information about disabling a channel, see Configuring the FC Host Channels on page 3-12.

2Power up connected servers, hubs, or switches on the network if necessary.

You are now ready to configure the router. To view the default settings, see Router Default Settings on page 2-10. For information about changing the default settings, see Chapter 3, Configuring the Router.

Understanding the LED Status Lights

LED status lights are on the rear panel of the router. For information about troubleshooting problems indicated by the status lights, see Chapter 4, Troubleshooting.

Figure 2-4. LED status lights

Table 2-2describes the meaning of the LED status lights located on the rear of the router.

Table 2-2. LED status lights

LED	Description	Color		Function
Label
FT	Router fault	Red	Solid on when router is powered-up and
			fails any internal diagnostic or detects a
			critical error
ST	Router status	Yellow	Solid on when router is powered-up and
			passes all internal diagnostics
		Yellow	Solid off when router either:
			✁	Detects a warning/degraded mode
			✁	Fails to boot

2-8