Chaparral FS2620R manual Changing Router Configuration, Changing the Screen Display

Changing Router Configuration

Changing the Screen Display

After you have accessed the Router Administrator software, you can change the screen display using a combination of keystrokes, as shown on the System Menu. Table 3-2 lists the keystrokes required to change various screen displays.

Table 3-3. Changing screen displays

Select Function

Ctrl-A Toggles between ANSI and VT100 character sets (use VT100 for legacy systems)

Ctrl-B Toggles between black and white and color screen

Ctrl-E Toggles between the event log, debug log, hardware information, and configuration information screens

Ctrl-H Toggles the Help screen

Ctrl-R Refreshes screen

Ctrl-Z Escapes or quits menu

Changing Router Configuration

You can use the Router Administrator software to change a variety of router configuration settings. You can:

✁Configure the FC channels (see page 3-12)

✁Change the router’s SCSI ID (initiator ID) for each channel (see page 3-17)

✁Set the date and time (see page 3-19)

✁Change the scan delay (see page 3-21)

✁Enable and disable the alarm (see page 3-21)

✁Restore the default settings (see page 3-23)

3-11