upgrading firmware 3-37FT light 2-8
fuse, replacing 4-5
G
gateway 3-6
GBICs, compatible types of 2-5
H
Hardware Information screen 3-34, 4-6hardware information, displaying 3-32Host Configuration screen 3-14
I
initial Router Administrator screen 3-2initiator ID, changing for router 3-17installing
example configurations of 2-11in a rack 2-2
on a desktop or table 2-2the router 2-1
L
LED lights 2-8
LED status lights 2-8lights 2-8
Link Speed screen 3-15LK light 2-9
Loop ID
changing for router 3-12settings for 3-12SOFT setting 3-12
Loop ID screen 3-15
Loop ID to AL_PA mapping A-2LOOP topology setting 3-12LUNs
changing for devices 3-25, 3-27changing for router 3-12displaying for router 3-36NONE setting 3-12
settings for 3-12SOFT setting 3-12
LVD model 2-4
M
MAC hardware address B-1map
displaying FC-to-SCSI address map 3-28FC-to-SCSI addresses A-1
Loop ID to AL_PA A-2mapping mode
AUTO setting 3-24changing 3-24FIXED setting 3-24
Mapping Mode screen 3-25
N
navigating in the Router Administrator software 3-9Network Management System Console
SNMP Configuration screen 3-7System Configuration screen 3-6TCP/IP Configuration screen 3-6
Network Management System Console screen 3-4, 3-5, 3-7, 3-8
NONE setting 3-12
P
packing list 2-1password
entering 3-4Password screen 3-4physical address B-1
POINT-TO-POINT topology setting 3-12powering down
devices 2-7the router 2-7
powering up devices 2-7the router 2-7
Problem 4-4problems
during bootup 4-1
router not responding 4-5with COM port 4-4
with device SCSI channel 4-5with terminal emulator 4-4with terminal screen 4-4
I-3