American Megatrends MAN-STOR-ITX27-CLI manual Chapter, Command Set

Page 13

Chapter 2

Command Set

Command Set

The CLI design being similar to the DMTF SMASH specifications follows the standard to a great extent. The commands supported can be represented grammatically as follows:

<verb> <option> … <property> <target>

The CLI provides a wide range of command sets. These commands are grouped into modules for better understanding. Each command is non-interactive and state-less. The <options> are supported using switches. Our CLI accepts both short and long options for each switch to make it user-friendly. If there is any error in the parameters entered, the CLI will display the usage of that particular command.

CLI also provides extensive online help. Each command supports a help option using ‘-h’ or ‘--help’ that will display the grammar of the command.

To get the main list of targets or modules present in CLI, the user should type the command “main” at the CLI prompt.

The following targets will get displayed:

*****************************************************************

TARGET LIST

-----------------------------------------------------------------

1.

ug

2.

ups

3.

dir

4.

srm

5.

dump

6.

raid

7.

ndmp

8.

alert

9.

iscsi

10.

share

11.

quota

12.

system

13.

volume

14.

domain

15.

health

16.

license

17.

network

18.

journal

19.

eventlog

20.

protocol

21.

firewall

22.

datetime

23.

timezone

24.

serverinfo

25.

sysupgrade

26.

syncreplica

27.

asyncreplica

28.

recoverywizard

29.

snapvalidation

 

 

 

For more information on the targets please use the following command show -t/--target <targetname>

Note : Targetnames are case insensitive

Example :

show -t iscsi

*****************************************************************

The show option can also be used to show commands based on <verb>, and to display the list of targets or verbs available.

Chapter Two: Command Set 7

Page 12 Page 14
Image 13
Page 12 Page 14
Contents MAN-STOR-ITX27-CLI 06/07/2010 Revision History Preface Table of Contents Limitations of Liability Limited WarrantyTechnical Support Disclaimer Preface Accessing CLIOverview of CLI NIC-1 Initial SetupThis will list the available RAID LD’s present in the system Volume ConfigurationPage To create a target, use the following commands Similarly a SAN volume can be created as followsNext step is to activate a port for iSCSI traffic Then, to enable the target, use the syntax belowChapter Command SetCLIshow -h Enter For example To find out how the show command works, typeThese commands configure the way alerts are generated Alert ConfigurationDomain Configuration Date/Time ConfigurationThese commands configure the time zone and date These commands display or clear the event log Event log CommandsThese commands configure the network firewall options Firewall ConfigurationHealth Configuration General Server ConfigurationThese commands get the health information ISCSI Configuration Command Argument Description These commands configure the License License configurationNetwork Controller Configuration NAS Quota Configuration List retrieved will be given for both instead of singly NAS User / Group ConfigurationFor exmaple set -t user -u test1 -p test1 -f Test1 ug Protocol Configuration RAID & Disk Management Commands Command Argument Description Upgrades the firmware for a These commands work on NAS shares and directory Share, Directory & ACL ConfigurationLevel for NT Volume and Snapshot Commands System Control ConfigurationThese commands configure the System controls 3provisiontype 0-ThinCommand Argument Description Command Argument Description These commands configure the UPS for power management UPS ConfigurationXml Synchronous replication For example update -l c0v0 -p 50 -m SyncreplicaFor example Update -l c0v0 -g rg0 syncreplica For example Update -l c0v0 -p 50 -m 172.16.70.102Asynchronous Replication These commands configure asynchronous replicationUtilization bandwidth utilization Command Argument Description Failedduetorollback Command Argument Description Command Argument Description Command Argument Description These commands configure a journal and journal file Journal Volume ManagementExample Example Get -t journalfile -c Cont0 -f jf0 journalPage These commands are to view cdp for journal file Recovery WizardThese commands are used as part of recovery wizard Continuous Data ProtectionStorage Resource Management These commands are used as part of SRMList the tasks in report, pending Workflow queueLocal and Replicated Snapshot validation These commands are used as part of snap validationPage Appendix a Error Codes Code 175 Error in mounting the share 338 License file read write error Code Code Code Code Description Code Description Code Description

MAN-STOR-ITX27-CLI specifications

American Megatrends Inc. (AMI), a leader in the design and development of innovative hardware and firmware solutions, has made significant strides with its product line, notably with the MAN-STOR-ITX27-CLI model. This compact yet powerful storage solution is designed to meet the evolving needs of modern computing environments, making it a popular choice among tech enthusiasts, system integrators, and IT professionals.

One of the main features of the MAN-STOR-ITX27-CLI is its form factor. Built in the Mini-ITX style, this storage system is optimized for space-saving applications without compromising performance. Its compact design allows it to be integrated into a variety of systems, from home media servers to business workstations, facilitating enhanced flexibility in deployment.

The MAN-STOR-ITX27-CLI utilizes advanced storage technologies to deliver reliable and high-speed data access. It supports multiple storage drives, including SSDs and traditional HDDs, providing users with a choice for speed or capacity according to their specific needs. The RAID configuration support enhances data redundancy and performance, ensuring that critical data remains accessible and secure.

In terms of connectivity, the MAN-STOR-ITX27-CLI is equipped with an array of ports, including USB 3.0, HDMI, and Ethernet, which facilitate seamless integration with other devices. High-speed data transfer rates are achieved, making it ideal for applications requiring quick data retrieval and storage, such as video editing and large-scale data analysis.

Another notable characteristic is its cooling system. The MAN-STOR-ITX27-CLI incorporates an efficient thermal management solution that helps maintain optimal operating temperatures, thus ensuring longevity and stability. This feature is particularly important in high-performance scenarios where excessive heat could impact system reliability.

Furthermore, the MAN-STOR-ITX27-CLI is designed with user-friendly features in mind. It allows for easy upgrades and expansions, making it a future-proof choice as storage demands continue to grow. The intuitive setup process and compatibility with a range of operating systems further simplify installation and management.

In conclusion, the American Megatrends MAN-STOR-ITX27-CLI is a versatile and powerful storage solution that excels in both performance and user convenience. Its advanced technology, compact design, and robust features make it a leading choice for anyone seeking reliable and efficient storage in a dynamic computing environment. With the increasing demand for data-driven solutions, products like the MAN-STOR-ITX27-CLI showcase AMI's commitment to innovation and quality in the field of technology.
Top Page Image Contents