American Megatrends MAN-STOR-ITX27-CLI manual Firewall Configuration

Firewall Configuration

These commands configure the network firewall options.

Command	Argument	Description
add firewall	-a/--allow or	Add allowed or blocked firewall
	-b/--block	rule with given parameters for the
	-i/--ip <ipaddress>	ICMP protocol.
	-m/--mask <netmask>
	-p/--proto {icmp}
	-x/--xml
add firewall	-a/--allow	Add allowed or blocked firewall
	-b/--block	rule with given parameters for TCP
	-i/--ip <ipaddress>	and UDP protocols.
	-m/--mask <netmask>
	-s/--sport <start-port>
	-e/--eport <end-port>
	-p/--proto {tcp/udp}
	For example: add –a –i 10.10.1.1 –s 1200 –e 5000 –
	p tcp firewall
edit firewall	-a/--allow or	Modifies specified allowed or
	-b/--block	blocked firewall rule with given
	-r/--rule<ruleno>	rule number to the given values for
	-i/--ip <IP address>	ICMP.
	-m/--mask <net mask>
	-p/--proto { icmp}
	-x/--xml
	For example: edit -a -i 10.0.0.218 -r 1 -m
	255.255.255.255 -p icmp -x firewall
delete firewall	-a/--allow or	Deletes allowed or blocked firewall
	-b/--block	rule with given rule number.
	-r/--num <rule number>(obtained when viewing the
	list of firewalls via the list command below)
	-x/--xml
	For example: delete -b -r 1 -x firewall
edit firewall	-a/--allow or	Modifies specified allowed or
	-b/--block	blocked firewall rule with given
	-r/--rule<ruleno>	rule number to the given values for
	-i/--ip <IP address>	TCP or UDP.
	-m/--mask <net mask>
	-s/--sport <start port>
	-e/--eport <end port>
	-p/--proto {tcp/udp}
	-x/--xml
	For example: edit -a -i 10.0.0.218 -r 1 -m
	255.255.255.255 -s 2000 -e 3000 -p udp -x firewall
list firewall		Lists all the blocked and allowed
		firewall rules.
get firewall	-c/--count	Retrieves the count of allowed or
	-x/--xml	blocked firewall rules.
	For example: get -c -x firewall

12StorTrends® iTX Software CLI (Command Line Interface) (Version 2.7) User’s Guide