Command | Argument | Description |
| Replication. | |
|
| |
|
| Note : |
| Example: |
|
| add | 1) The periodicity can be of one of |
| asyncreplica | the following |
|
| a.“<start |
|
| |
| add | b.“<start time > |
| asyncreplica | day>” |
|
| c.“<start |
| add | <start_day>” |
| asyncreplica | d.“<start time> <start_day>” |
|
| e.“ * *” |
| add | f.“ * |
|
| g.“<start |
|
| 2) The ‘start time’ and ‘end time’ |
|
| can take values from |
|
| representing the hour of the day |
|
| only. |
|
| 3) The ‘start day’ and ‘end day’ |
|
| can take values from |
|
| representing the day of the week |
|
| only. |
|
| 4) ‘*’ indicates all hours of the day |
|
| or all days of the week based on its |
|
| position. |
|
| Note: The end_time and end_day |
|
| are not included. Meaning |
|
| means |
|
| means Monday and Tuesday |
|
| 5) A Maximum of 8 periodicity |
|
| information is allowed for |
|
| Asynchronous Replication pair |
|
| 6) This command can be issued in |
|
| a primary. |
remove asyncreplica | Remove periodicity information for | |
| a particular Asynchronous | |
| Replication. | |
|
| |
|
| Note: |
| Example: |
|
| remove | 1) The periodicity format should be |
| asyncreplica | same as above. |
| remove | 2) This command can be issued in |
| asyncreplica | a primary. |
| remove |
|
| asyncreplica |
|
| remove |
|
| asyncreplica |
|
set asyncreplica | Sets the snapshot schedule for a | |
| CG. |
Chapter Two: Command Set 37