AMCC 9550SX-8LP manual Other Documentation, Installation Considerations

Page 6

Chapter 1. Installing an AMCC 3ware 9550SX RAID Controller

Other Documentation

The following additional documentation is available for your 3ware 9550SX RAID Controller:

In PDF format, on the CD that came with your controller, and available through the 3ware website:

„3ware 9550SX Serial ATA RAID Controller User Guide

„3ware 9000 Series Serial ATA RAID Controller CLI Guide

In HTML format:

„Online help is available from 3DM 2 (3ware Disk Manager)

„Additional support information is available in the 3ware Knowledgebase, at this website: http://www.3ware.com/KB

Installation Considerations

Cable Length, Routing Space, and Air Flow

When you are installing multiple drives with a controller, make sure there is adequate space in the chassis for the required cables. It is important that the cables do not obstruct the air flow or prevent proper ventilation of the system.

Selecting the Slot in Which to Install the Controller

Consider these factors when deciding on the slot in which to insert the controller:

„Cable routing may be easier if you install the 3ware RAID controller next to an open slot.

The amount of clearance you need will depend on the number of drives you will be connecting to the controller.

23ware 9550SX Serial ATA RAID Controller Quick Install Guide

Image 6
Contents 3ware Copyright TrademarksDisclaimer Table of Contents Appendix Technical Support Contents of Package Before You BeginInstallation Considerations Other DocumentationWhether to Use the LED Status Connector Safety Factors Personal SafetyWhat You Need Tools and Equipment Protecting Equipment and Data 9550SX 8-Port with Standard Sata Connectors 9550SX RAID Controller Cards9550SX 4-Port with Standard Sata Connectors 9550SX 12-Port with Standard Sata Connectors9550SX 12-Port with Multilane Internal Sata Connectors 9550SX 16-Port with Multilane Internal Sata ConnectorsInstalling a Serial ATA RAID Controller To connect Sata cables to the controllerTo install the controller in the computer Sata Cables Being Inserted Into PortInserting Controller Into PCI Slot Sata Cable Connecting to Drive To connect the Sata cables to the drives9550SX-12MI Multilane Serial ATA Cable InfiniBand 4x, SFF-84709550SX-16ML Multilane Cable Serial ATA SFF-8087Page To install the drives Connecting Drive Activity LED Indicators LED connector detailsPort 3ware 9550SX-12 Serial ATA RAID Controller Additional Details About the LED Status Connectors LED Indicator Pin Positions Check Installation and Close the Case Configure your RAID ArraysFinishing Up Installing an Amcc 3ware 9550SX RAID Controller Installing the Battery Backup Unit Installation Overview Tools and equipment requiredPoints of connection on the half-height controller Installation Instructions Removing the head from the plastic postPress down gently until the BBU is seated If you have a 4-port or 8-port 9550SX If you have a 12-port or 16-port 9550SX Shows the BBU fully installed on 3ware controllers BBU installed on controllers Replacing the Battery Removing the battery module Removing the power cable from the BBU module Sales and ordering information Feedback on this manualAppendix Technical Support