Chapter 2. Installing the Battery Backup Unit
Installation Instructions
1Remove the screw head from the plastic post on the BBU control module and set it aside (you will reattach it soon.)
Figure 22. Removing the head from the plastic post
2Position the BBU control module above the controller and align the BBU control module and the controller, making sure to:
Mate the connector on the BBU control module with the receptacle on the controller.
Match the plastic post on the BBU with the hole on the controller.
Figure 23. BBU control module ready to connect to the controller
263ware 9550SX Serial ATA RAID Controller Quick Install Guide