AMCC 9690SA manual Safety Information, Site Selection

Page 12

Chapter 1. Getting Started

Safety Information

To reduce the risk of bodily injury, electrical shock, fire, and equipment damage, read this information and observe all warnings and precautions in this guide before installing or maintaining your computer.

The 3ware 9690SA RAID controller card should be installed by technically qualified persons. If you are uncomfortable opening a computer system and conforming to standard ESD (electrostatic discharge) practices, you should have a computer technician perform the installation.

Site Selection

The product is designed to operate as a component to a computer system. The environment that is provided for the system must be:

„Clean, dry, and free of airborne particles (other than normal room dust).

„Well-ventilated and away from sources of heat including direct sunlight and radiators.

„Away from sources of vibration or physical shock.

„Isolated from strong electromagnetic fields produced by electrical devices.

„In regions that are susceptible to electrical storms, we recommend you plug your system into a surge suppressor or UPS (uninterruptible power supply). During an electrical storm, we recommend disconnecting all phone, network, and power cables.

„Provided with a properly grounded wall outlet.

„Provided a product main power disconnect or sufficient space to access the power supply cord(s), because they serve as the product's main power disconnect.

83ware 9690SA SAS/SATA RAID Controller Installation Guide

Image 12
Contents 3ware 9690SA SAS/SATA RAID Controller Copyright TrademarksDisclaimer Table of Contents About this Guide Contents of this Package Getting Started3ware 9690SA SAS/SATA RAID Controller Installation Guide 9690SA RAID Controller Card ModelsPort 3ware 9690SA-8I Serial ATA RAID Controller Cables Port 3ware 9690SA-8E Serial ATA RAID Controller Other Available Cables Multi-lane Cable Serial ATA SFF-8087System Requirements Motherboard and Slot RequirementsOperating System Requirements Safety Information Site SelectionProtecting Equipment and Data Installation Considerations Tools You Need Before You StartInstall the Controller in the Computer Inserting Controller Into PCI Express Slot Attach the Cables to Your Controller Connect the Cables to Backplanes External Enclosure ConnectionFinishing Up the RAID Controller Installation Configure Your RAID ArraysConnect Battery if appropriate Check Installation and Close the CaseInstalling a Battery Backup Unit Items in Remote Battery Installation PackageInstalling the Control Module To install the control module Installing the Remote Battery BBU control module connected to the controllerThree locations for mounting battery on remote board Attaching the battery module to the remote board Installing the Remote Battery Replacing the Battery Removing the power cable from the BBU module 26 3ware 9690SA SAS/SATA RAID Controller Installation Guide Sales and ordering information Feedback on this manual
Related manuals
Manual 30 pages 1.85 Kb