AMCC 9690SA manual To install the control module

Page 23

Installing the Control Module

To install the control module

Note: The following illustrations show the 9690SA-4I4E. If you have a 9690SA-8E the location of the control module post hole will be different.

1Remove the screw head from the plastic post on the BBU control module and set it aside (you will reattach it soon.)

Figure 11. Removing the head from the plastic post

2Position the BBU control module above the controller (Figure 12) and align the BBU control module and the controller, making sure to:

„Mate the connector on the BBU control module with the receptacle on the controller.

„Match the plastic post on the BBU with the hole on the controller.

Figure 12. BBU control module ready to connect to the controller

www.3ware.com

19

Image 23
Contents 3ware 9690SA SAS/SATA RAID Controller Disclaimer CopyrightTrademarks Table of Contents About this Guide Getting Started Contents of this Package9690SA RAID Controller Card Models 3ware 9690SA SAS/SATA RAID Controller Installation GuidePort 3ware 9690SA-8I Serial ATA RAID Controller Port 3ware 9690SA-8E Serial ATA RAID Controller CablesMulti-lane Cable Serial ATA SFF-8087 Other Available CablesMotherboard and Slot Requirements System RequirementsOperating System Requirements Site Selection Safety InformationProtecting Equipment and Data Installation Considerations Before You Start Tools You NeedInstall the Controller in the Computer Inserting Controller Into PCI Express Slot Attach the Cables to Your Controller External Enclosure Connection Connect the Cables to BackplanesCheck Installation and Close the Case Finishing Up the RAID Controller InstallationConfigure Your RAID Arrays Connect Battery if appropriateItems in Remote Battery Installation Package Installing a Battery Backup UnitInstalling the Control Module To install the control module BBU control module connected to the controller Installing the Remote BatteryThree locations for mounting battery on remote board Attaching the battery module to the remote board Installing the Remote Battery Replacing the Battery Removing the power cable from the BBU module 26 3ware 9690SA SAS/SATA RAID Controller Installation Guide Feedback on this manual Sales and ordering information
Related manuals
Manual 30 pages 1.85 Kb