American Dynamics KT-400 installation manual System Architecture

Page 15

KT-400 Ethernet Four-Door Controller Installation Manual

System Architecture

The KT-400 Ethernet Four-Door Controller can be used through various site applications with EntraPass Special Edition, EntraPass Corporate Edition and EntraPass Global Edition.

Applications with EntraPass Special Edition and Corporate Edition with Corporate Gateway.

•Over the internet. See Figure 4.

•Over RS-232 with a USB-485. See Figure 5.

Application with EntraPass Global Edition and a Global Gateway.

•Over RS-232 with a VC-485. See Figure 6. Application with EntraPass Global Edition and a KT-NCC.

•Over the internet with a KT-NCC. See Figure 7.

Application with EntraPass Special Edition, Corporate Edition and Global Edition.

•Over RS-232 straight from EntraPass RS-232 COM port. See Figure 8.

Figure 4: Over the Internet with EntraPass Special Edition and Corporate Edition with Corporate Gateway

DN1726-0811

11

Image 15

Contents KT-400 Page Table of Contents Installation Checklist Inputs and Outputs Assignments Sheet Pre-Installation Information Technical Support UL 1076 Compliance Notice Compliance Specifications FCC & IC ComplianceUL Compliance UL 294 Compliance NoticeDN1726-0811 Overview Multiple Configuration OptionsInputs Trouble and Reporting KT-400 Ethernet Four-Door Controller PCB View KT-400 KT-400 Cabinet Model for North America System Architecture DN1726-0811 Over the internet with a KT-NCC and EntraPass Global Edition Vital LED Heartbeat Patterns Vital LED Heartbeat PatternsType Description Technical SpecificationsRelated Documentation Electrical SpecificationsTypical Expansion Modules ModelsDimensions Drawings Part number DescriptionMiscellaneous Items DN1762, Figure Models InformationEarth Grounding AWG #18 grounding wire to Egnd Installing the KT-400 Ethernet Four-Door ControllerReader Connection Terminal Warning Connect readers and keypadsRelay Controlled Outputs Tamper Protection Install tamper switch on cabinetBlue Connecting the KT-400 Ethernet Four-Door ControllerConnecting over Corporate Network LAN Powering the KT-400 Ethernet Four-Door ControllerExample of current draw calculation SPI Expansion PortKT-MOD-CAB Dimensions Drawing in DWG Format Important Installation Rules about Expansion ModulesPCB View of Expansion Modules With Expansion ModulesEthernet Four Expansion Modules Cabinet for North America Soft Reset TroubleshootingKT-400 Factory Default Steps Default initializationAnnual test for emergency lithium ion battery Bi-annual test for batteryOptional Documentation Important The KT-Finder application is Make sure the KT-400 is in Factory Default Dhcp mode. See onVerify your Network Configuration Information Sheet KT-400 Ethernet Four-Door Controller KT-400 Ethernet Four-Door Controller Site EntraPass SiteInstalling the KT-400 Ethernet Four-Door Controller Installation ChecklistNo or NC EOL, DRY or Deol Inputs and Outputs Assignments SheetKT-400 Cabinet Inner Door Sticker Diagram North America DN1726-0811