American Dynamics Hammond BF2F Transformer Requirements for KT-400 Ethernet Four-Door Controller Installation
Page 7

KT-400 Ethernet Four-Door Controller Installation Manual

Compliance Specifications

FCC & IC Compliance

This device complies with Part 15 of the FCC rules Class A. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. This class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. The KT-400 Ethernet Four-Door Controller is also compliant with EN55022:1998, amendment 1:1995, Class A.

UL Compliance

To comply with UL listings, the following requirements must be met:

•Use of a UL listed computer

•Use of UL listed readers (Wiegand 26 and 34 bits, mag stripe 26 and 34 bits, XSF 39 bits have been tested and found to comply)

•Use of a UL recognized tamper switch on every housing cabinet for the KT-400 Ethernet Four-Door Controller

•Do not use the SmartLink option

•Do not use a 240 VAC transformer (not UL listed)

•Use only UL listed cables

•Use only UL listed adaptors

•Use only a UL listed transformer Hammond BF2F such as Kantech part number TR1675 (Available through Kantech distributors or dealers, please refer to the Technical Support contact information on page 2 to obtain the specific transformer)

Note: All circuits are power limited.

UL 294 Compliance Notice

•IP Connectivity: Only for supplementary use when planning to install the KT-400 Ethernet Four-Door Controller with a UL 294 access control system.

•Use only UL 294 or UL 1076 listed power supply

•Connect Kantech part number KT-ACPW-LEDstatus indicator to the 16 VAC black terminals of the KT-400

•Use Kantech part number KT-BATT-12battery, see Note.

Note: Backup battery provides operation of up to 12 hours but has been tested for 4 hours per Section 33 of UL 294, fifth edition.

UL 1076 Compliance Notice

•The KT-400 is UL 1076 Listed as a Commercial Proprietary Control Unit Accessory and Proprietary Burglar Alarm Unit (Section 83.2), with EntraPass and Redundant Server, alarm system features, KT-300 Controllers, ioProx Proximity readers, and TRex request to exit devices – other sensor devices (temperature, water level, etc.) may be used as long as they are also UL 1076 Listed.

•The EntraPass and Redundant Server shall be running at all time, and manned 24 hours a day, 365 days a year

– The EntraPass and Redundant Server will each have their own operator workstation.

•Data processing equipment and office appliance and business equipment used as central supervisory equipment station shall be listed to Information Technology Equipment - UL 60950.

•Should the EntraPass and/or Redundant Server be replaced, a UL 60950 listed computer must be used.

•The following recommended system requirements apply to the EntraPass Server, Redundant Server, Video Vault, Card Gateway, SmartLink, and Workstation:

•Operating Systems: Windows® 2000/XP/2003 Standard and Enterprise Server Editions/Vista

•Processor: Pentium IV at 1.8 GHz

DN1726-0811

3

Page 6 Page 8
Image 7
Page 6 Page 8
Contents KT-400 Page Table of Contents Installation Checklist Inputs and Outputs Assignments Sheet Pre-Installation Information Technical Support UL 1076 Compliance Notice Compliance Specifications FCC & IC ComplianceUL Compliance UL 294 Compliance NoticeDN1726-0811 Overview Multiple Configuration OptionsInputs Trouble and Reporting KT-400 Ethernet Four-Door Controller PCB View KT-400 KT-400 Cabinet Model for North America System Architecture DN1726-0811 Over the internet with a KT-NCC and EntraPass Global Edition Vital LED Heartbeat Patterns Vital LED Heartbeat PatternsType Description Technical SpecificationsRelated Documentation Electrical SpecificationsTypical Expansion Modules ModelsPart number Description Dimensions DrawingsMiscellaneous Items DN1762, Figure Models InformationEarth Grounding AWG #18 grounding wire to Egnd Installing the KT-400 Ethernet Four-Door ControllerReader Connection Terminal Warning Connect readers and keypadsRelay Controlled Outputs Tamper Protection Install tamper switch on cabinetBlue Connecting the KT-400 Ethernet Four-Door ControllerConnecting over Corporate Network LAN Powering the KT-400 Ethernet Four-Door ControllerExample of current draw calculation SPI Expansion PortKT-MOD-CAB Dimensions Drawing in DWG Format Important Installation Rules about Expansion ModulesPCB View of Expansion Modules Expansion Modules WithEthernet Four Expansion Modules Cabinet for North America Soft Reset TroubleshootingKT-400 Factory Default Steps Default initializationAnnual test for emergency lithium ion battery Bi-annual test for batteryOptional Documentation Important The KT-Finder application is Make sure the KT-400 is in Factory Default Dhcp mode. See onVerify your Network Configuration Information Sheet KT-400 Ethernet Four-Door Controller KT-400 Ethernet Four-Door Controller Site EntraPass SiteInstalling the KT-400 Ethernet Four-Door Controller Installation ChecklistNo or NC EOL, DRY or Deol Inputs and Outputs Assignments SheetKT-400 Cabinet Inner Door Sticker Diagram North America DN1726-0811

KT-400 specifications

The American Dynamics KT-400 is a robust and versatile video management system designed for a wide range of security applications. As a part of American Dynamics' extensive lineup of surveillance solutions, the KT-400 caters to various industries, including retail, transportation, and critical infrastructure, enabling efficient surveillance and management of video data.

One of the main features of the KT-400 is its exceptional scalability. The system can support a large number of cameras, making it suitable for both small and expansive enterprises. Users can easily manage thousands of video feeds, enabling effective monitoring of large facilities or multiple locations from a centralized interface. This scalability is complemented by its user-friendly web-based interface, which allows operators to access the system remotely, providing flexibility and convenience.

In terms of technology, the KT-400 employs advanced video analytics capabilities. These analytics enhance security measures by allowing the system to detect unusual activities, such as unauthorized access or suspicious behavior, reducing reliance on manual monitoring. The analytics can send instant alerts, which can significantly improve response time during security incidents. Integration with other security systems, such as access control and intrusion detection systems, further enhances its effectiveness.

The KT-400 is designed for high-performance video recording, featuring high-resolution recording capabilities that ensure clear and detailed footage, crucial for identification purposes. The system also supports various compression standards, optimizing storage use while maintaining video quality. Coupled with its redundancy features, such as failover capabilities, the KT-400 ensures that critical video data is preserved even in the event of hardware failures.

Moreover, the KT-400 supports a wide range of camera types, including IP and analog cameras, making it a versatile choice for existing legacy systems as well as new installations. This compatibility, along with support for various video formats, allows for seamless integration, providing users with the flexibility to design their surveillance systems according to their needs.

In conclusion, the American Dynamics KT-400 stands out for its scalability, advanced video analytics, high-performance recording, and broad compatibility with different camera types. These features make it an ideal choice for organizations looking to enhance their security management and respond swiftly to potential threats. With ongoing technological advancements, the KT-400 is poised to remain a reliable choice in the evolving security landscape.
Top Page Image Contents