American Dynamics Comprehensive KT-400 Installation Manual and Wiring Diagram

Page 27

KT-400 Ethernet Four-Door Controller Installation Manual

Connecting the Master Controller to the Host PC via RS-232

Connect RS-232 cable from KT-400 to the PC (maximum length 30 m (100 ft))

If the local master controller is located more than 30 m (100 ft) from the host computer, you must use a VC-485 or USB-485 interface.

Note 1: The CBLK-10kit includes 30 m (100 ft) of RS-232 cable with RJ-12 connectors and the 740-1023 (DB9F to RJ-12) adaptor

Note 2: If you must make up your own RS-232 cable with RJ-12 connectors, refer to the following diagram for the RJ- 12 pin-out.

Connecting over Corporate Network (LAN)

If the master controller is used in a LAN-enabled corporate setting, use the RJ-45 Ethernet port to connect the controller to the corporate network. This method uses existing wiring for data exchange between EntraPass and the controllers.

Powering the KT-400 Ethernet Four-Door Controller

Install 120 VAC IN / 16 VAC, 75 VA OUT, class 2 transformer

Place battery in cabinet

Power up the KT-400 Ethernet Four-Door Controller

The KT-400 must be powered by a 16 VAC, 75 VA class 2 wire-in or plug-in transformer.

After you have completed all the necessary steps, you can power up the KT-400. Connect AC power and connect the battery. Once powered, check the VITAL LED status indicator to determine the status of communication and other vital parameters. Consult Table 1 for VITAL LED behavior identifications.

If the AC supply is removed, the 12 VDC, 7 Ah backup battery will support normal operation for up to 12 hours, if fully charged. Internal battery verification will cutoff battery power if the battery voltage level falls below 9.5 Volts.

Note: The KT-400 will not start on battery power alone.

Power should only be applied to the unit when all connections are completed and tested.

DN1726-0811

23

Image 27
Contents KT-400 Page Table of Contents Installation Checklist Inputs and Outputs Assignments Sheet Pre-Installation Information Technical Support UL 1076 Compliance Notice Compliance Specifications FCC & IC ComplianceUL Compliance UL 294 Compliance NoticeDN1726-0811 Overview Multiple Configuration OptionsInputs Trouble and Reporting KT-400 Ethernet Four-Door Controller PCB View KT-400 KT-400 Cabinet Model for North America System Architecture DN1726-0811 Over the internet with a KT-NCC and EntraPass Global Edition Vital LED Heartbeat Patterns Vital LED Heartbeat PatternsType Description Technical SpecificationsRelated Documentation Electrical SpecificationsTypical Expansion Modules ModelsDimensions Drawings Part number DescriptionMiscellaneous Items DN1762, Figure Models InformationEarth Grounding AWG #18 grounding wire to Egnd Installing the KT-400 Ethernet Four-Door ControllerReader Connection Terminal Warning Connect readers and keypadsRelay Controlled Outputs Tamper Protection Install tamper switch on cabinetBlue Connecting the KT-400 Ethernet Four-Door ControllerConnecting over Corporate Network LAN Powering the KT-400 Ethernet Four-Door ControllerExample of current draw calculation SPI Expansion PortKT-MOD-CAB Dimensions Drawing in DWG Format Important Installation Rules about Expansion ModulesPCB View of Expansion Modules With Expansion ModulesEthernet Four Expansion Modules Cabinet for North America Soft Reset TroubleshootingKT-400 Factory Default Steps Default initializationAnnual test for emergency lithium ion battery Bi-annual test for batteryOptional Documentation Important The KT-Finder application is Make sure the KT-400 is in Factory Default Dhcp mode. See onVerify your Network Configuration Information Sheet KT-400 Ethernet Four-Door Controller KT-400 Ethernet Four-Door Controller Site EntraPass SiteInstalling the KT-400 Ethernet Four-Door Controller Installation ChecklistNo or NC EOL, DRY or Deol Inputs and Outputs Assignments SheetKT-400 Cabinet Inner Door Sticker Diagram North America DN1726-0811

KT-400 specifications

The American Dynamics KT-400 is a robust and versatile video management system designed for a wide range of security applications. As a part of American Dynamics' extensive lineup of surveillance solutions, the KT-400 caters to various industries, including retail, transportation, and critical infrastructure, enabling efficient surveillance and management of video data.

One of the main features of the KT-400 is its exceptional scalability. The system can support a large number of cameras, making it suitable for both small and expansive enterprises. Users can easily manage thousands of video feeds, enabling effective monitoring of large facilities or multiple locations from a centralized interface. This scalability is complemented by its user-friendly web-based interface, which allows operators to access the system remotely, providing flexibility and convenience.

In terms of technology, the KT-400 employs advanced video analytics capabilities. These analytics enhance security measures by allowing the system to detect unusual activities, such as unauthorized access or suspicious behavior, reducing reliance on manual monitoring. The analytics can send instant alerts, which can significantly improve response time during security incidents. Integration with other security systems, such as access control and intrusion detection systems, further enhances its effectiveness.

The KT-400 is designed for high-performance video recording, featuring high-resolution recording capabilities that ensure clear and detailed footage, crucial for identification purposes. The system also supports various compression standards, optimizing storage use while maintaining video quality. Coupled with its redundancy features, such as failover capabilities, the KT-400 ensures that critical video data is preserved even in the event of hardware failures.

Moreover, the KT-400 supports a wide range of camera types, including IP and analog cameras, making it a versatile choice for existing legacy systems as well as new installations. This compatibility, along with support for various video formats, allows for seamless integration, providing users with the flexibility to design their surveillance systems according to their needs.

In conclusion, the American Dynamics KT-400 stands out for its scalability, advanced video analytics, high-performance recording, and broad compatibility with different camera types. These features make it an ideal choice for organizations looking to enhance their security management and respond swiftly to potential threats. With ongoing technological advancements, the KT-400 is poised to remain a reliable choice in the evolving security landscape.