American Dynamics KT-400 installation manual DN1726-0811

Page 8

•1 GB RAM

•Minimum free hard disk space: 20 GB

•Color depth: 24-bit (16 million colors), required for Video Integration only

•Screen resolution: 1024 x 768

•Graphic adapter card: 32 MB

•48X CD-ROM drive

•Network Interface card: 10/100 Base-T network adaptor

Note: Actual requirements may vary based on your operating system and configuration.

•The Central Supervisory Equipment shall employ supply line transient protection complying with the Standard for Transient Voltage Surge Suppressors, UL 1449, with a maximum marked rating of 330 V.

•The Central Supervisory Equipment shall employ signal line Transient protection complying with the Standard for Protectors for Data Communications and Fire Alarm Circuits, UL 497B, with a maximum marked rating of 50 V.

•The Central Supervisory Equipment shall employ that communication circuits and network components connected to the telecommunications network shall be protected by secondary protectors for communication circuits. These protectors shall comply with the Standard for Secondary Protectors for Communications Circuits, UL 497A. These protectors shall be used only in the protected site of the telecommunications network.

•The Central Supervisory Equipment shall be installed in a temperature controlled environment. A temperature controlled environment is defined as one that can be maintained between 13° - 35°C (55° - 95°F) by HVAC system. Twenty-four hours on standby power shall be provided for the HVAC system. The standby power system for the HVAC system may be supplied by an engine driven generator alone. A standby battery is not required to be used.

•A marking to identify the application and signaling function of the product is located on the inside of the unit (inner door sticker).

•For certified commercial proprietary control unit accessory applications, the requirements of UL 1076, Commercial Proprietary Control Unit Accessory also apply.

•Use Kantech part number KT-3LED-PLATE3-color LED indicators mounted on single plate when the KT-400 is configured with the (APOU/ALVY) KT-NCC in an EntraPass Global Edition system for remote alarm monitoring. Refer to the KT-NCC Installation Manual, DN1611 for additional details.

•The reader(s), that is(are) designated to arm or disarm the alarm system, must be within the secured side of the customer premises.

•The following Kantech readers have been validated by UL for the UL 1076 Standard: P225W26, P225KPW26, P225XSF, P225KPXSF, P325W26, P325KPW26, P325XSF, P325KPXSF and P600.

Note: All readers can be ordered with or without the following suffixes: BEI, BEI-SE, GRY or GRY-SE.

•The KT-400 Ethernet Four-Door Controller is UL 1076 listed when used with the (APOU/ALVY) KT-NCC (Network Communications Controller).

•All alarms shall be reported and acknowledged in the following priority:

Note: To set these priorities, please adjust the Event Parameters, found in EntraPass System

1.Fire alarm and industrial supervision where a risk of injury to persons, or damage or destruction of property may be involved

2.Hold-up or panic alarm

3.Burglar alarm

4.Watchman tour (Guard tour)

5.Fire-alarm supervision

6.Burglar-alarm supervision

7.Industrial supervision where a risk of injury to persons, or damage or destruction of property will not be involved.

4

DN1726-0811

Page 7 Page 9
Image 8
Page 7 Page 9
Contents KT-400 Page Table of Contents Installation Checklist Inputs and Outputs Assignments Sheet Pre-Installation Information Technical Support Compliance Specifications FCC & IC Compliance UL ComplianceUL 294 Compliance Notice UL 1076 Compliance NoticeDN1726-0811 Multiple Configuration Options OverviewInputs Trouble and Reporting KT-400 Ethernet Four-Door Controller PCB View KT-400 KT-400 Cabinet Model for North America System Architecture DN1726-0811 Over the internet with a KT-NCC and EntraPass Global Edition Vital LED Heartbeat Patterns Vital LED Heartbeat PatternsTechnical Specifications Type DescriptionElectrical Specifications TypicalExpansion Modules Models Related DocumentationMiscellaneous Items Dimensions DrawingsPart number Description Models Information DN1762, FigureInstalling the KT-400 Ethernet Four-Door Controller Earth Grounding AWG #18 grounding wire to EgndConnect readers and keypads Reader Connection Terminal WarningTamper Protection Install tamper switch on cabinet Relay Controlled OutputsConnecting the KT-400 Ethernet Four-Door Controller BluePowering the KT-400 Ethernet Four-Door Controller Connecting over Corporate Network LANSPI Expansion Port Example of current draw calculationImportant Installation Rules about Expansion Modules KT-MOD-CAB Dimensions Drawing in DWG FormatPCB View of Expansion Modules Ethernet Four WithExpansion Modules Expansion Modules Cabinet for North America Troubleshooting Soft ResetDefault initialization KT-400 Factory Default StepsBi-annual test for battery Annual test for emergency lithium ion batteryOptional Documentation Make sure the KT-400 is in Factory Default Dhcp mode. See on Important The KT-Finder application isVerify your Network Configuration Information Sheet KT-400 Ethernet Four-Door Controller EntraPass Site KT-400 Ethernet Four-Door Controller SiteInstallation Checklist Installing the KT-400 Ethernet Four-Door ControllerInputs and Outputs Assignments Sheet No or NC EOL, DRY or DeolKT-400 Cabinet Inner Door Sticker Diagram North America DN1726-0811

KT-400 specifications

The American Dynamics KT-400 is a robust and versatile video management system designed for a wide range of security applications. As a part of American Dynamics' extensive lineup of surveillance solutions, the KT-400 caters to various industries, including retail, transportation, and critical infrastructure, enabling efficient surveillance and management of video data.

One of the main features of the KT-400 is its exceptional scalability. The system can support a large number of cameras, making it suitable for both small and expansive enterprises. Users can easily manage thousands of video feeds, enabling effective monitoring of large facilities or multiple locations from a centralized interface. This scalability is complemented by its user-friendly web-based interface, which allows operators to access the system remotely, providing flexibility and convenience.

In terms of technology, the KT-400 employs advanced video analytics capabilities. These analytics enhance security measures by allowing the system to detect unusual activities, such as unauthorized access or suspicious behavior, reducing reliance on manual monitoring. The analytics can send instant alerts, which can significantly improve response time during security incidents. Integration with other security systems, such as access control and intrusion detection systems, further enhances its effectiveness.

The KT-400 is designed for high-performance video recording, featuring high-resolution recording capabilities that ensure clear and detailed footage, crucial for identification purposes. The system also supports various compression standards, optimizing storage use while maintaining video quality. Coupled with its redundancy features, such as failover capabilities, the KT-400 ensures that critical video data is preserved even in the event of hardware failures.

Moreover, the KT-400 supports a wide range of camera types, including IP and analog cameras, making it a versatile choice for existing legacy systems as well as new installations. This compatibility, along with support for various video formats, allows for seamless integration, providing users with the flexibility to design their surveillance systems according to their needs.

In conclusion, the American Dynamics KT-400 stands out for its scalability, advanced video analytics, high-performance recording, and broad compatibility with different camera types. These features make it an ideal choice for organizations looking to enhance their security management and respond swiftly to potential threats. With ongoing technological advancements, the KT-400 is poised to remain a reliable choice in the evolving security landscape.
Top Page Image Contents