American Dynamics KT-400 installation manual Installation Checklist

Page 41

KT-400 Ethernet Four-Door Controller Installation Manual

Installation Checklist

To the Installer: If you are familiar with the installation, you can use the checklist with the symbol.

Installing the KT-400 Ethernet Four-Door Controller

Preparing to install the KT-400 Ethernet Four-Door Controller

Required to install KT-400 Ethernet Four-Door Controller

Physical Installation

Check for ideal indoor location

Stay away from electrical or communication devices

Earth Grounding

AWG#18 grounding wire to EGND

Door Locking Devices

Connect the door locked device to + and LK1-, (+ and LK2-), (+ and LK3-), or (+ and LK4-)

When jumper JP4 on INT (internal), the maximum current draw is 1 Amp at 12 to 13.75 VDC, or

When jumper JP4 on EXT (external), the maximum current draw is 3 Amps at 12 to 28 VDC

Check for local “magnetic lock” regulations

Hooking Up Inputs

Connect devices to inputs 1 to 16

Resistors for all inputs 5.6K ohm (if necessary)

Connect readers and keypads

Auxiliary Outputs

Connect auxiliary outputs to readers and local warning devices

Tamper Protection

Install tamper switch on cabinet

Connecting the KT-400 Ethernet Four-Door Controller

Connecting the VC-485 or the USB-485 to the RS-485 Bus

Connect the RS-485 cable to (COM1) +485- and the RS-485 signal ground to the 12 VDC AUX - (negative) Connecting the Master Controller to the Host PC

Connect the RS-232 flat cable from the KT-400 to the PC

Connecting Expansion Modules to the KT-400 SPI Expansion Port

Make sure input and output expansion modules are not in the same SPI group

Calculate maximum current draw and connect external power supply(ies) to expansion module(s), if required Make sure the power jumper on the modules is in the correct position when using external power supply(ies)

Powering the KT-400 Ethernet Four-Door Controller (for North America only)

Install 120 VAC IN / 16 VAC, 75 VA OUT, class 2 transformer

Place battery in cabinet

Power up the KT-400 Ethernet Four-Door Controller

DN1726-0811

37

Image 41
Contents KT-400 Page Table of Contents Installation Checklist Inputs and Outputs Assignments Sheet Pre-Installation Information Technical Support UL Compliance Compliance Specifications FCC & IC ComplianceUL 294 Compliance Notice UL 1076 Compliance NoticeDN1726-0811 Overview Multiple Configuration OptionsInputs Trouble and Reporting KT-400 Ethernet Four-Door Controller PCB View KT-400 KT-400 Cabinet Model for North America System Architecture DN1726-0811 Over the internet with a KT-NCC and EntraPass Global Edition Vital LED Heartbeat Patterns Vital LED Heartbeat PatternsType Description Technical SpecificationsTypical Electrical SpecificationsExpansion Modules Models Related DocumentationMiscellaneous Items Dimensions DrawingsPart number Description DN1762, Figure Models InformationEarth Grounding AWG #18 grounding wire to Egnd Installing the KT-400 Ethernet Four-Door ControllerReader Connection Terminal Warning Connect readers and keypadsRelay Controlled Outputs Tamper Protection Install tamper switch on cabinetBlue Connecting the KT-400 Ethernet Four-Door ControllerConnecting over Corporate Network LAN Powering the KT-400 Ethernet Four-Door ControllerExample of current draw calculation SPI Expansion PortKT-MOD-CAB Dimensions Drawing in DWG Format Important Installation Rules about Expansion ModulesPCB View of Expansion Modules Ethernet Four WithExpansion Modules Expansion Modules Cabinet for North America Soft Reset TroubleshootingKT-400 Factory Default Steps Default initializationAnnual test for emergency lithium ion battery Bi-annual test for batteryOptional Documentation Important The KT-Finder application is Make sure the KT-400 is in Factory Default Dhcp mode. See onVerify your Network Configuration Information Sheet KT-400 Ethernet Four-Door Controller KT-400 Ethernet Four-Door Controller Site EntraPass SiteInstalling the KT-400 Ethernet Four-Door Controller Installation ChecklistNo or NC EOL, DRY or Deol Inputs and Outputs Assignments SheetKT-400 Cabinet Inner Door Sticker Diagram North America DN1726-0811

KT-400 specifications

The American Dynamics KT-400 is a robust and versatile video management system designed for a wide range of security applications. As a part of American Dynamics' extensive lineup of surveillance solutions, the KT-400 caters to various industries, including retail, transportation, and critical infrastructure, enabling efficient surveillance and management of video data.

One of the main features of the KT-400 is its exceptional scalability. The system can support a large number of cameras, making it suitable for both small and expansive enterprises. Users can easily manage thousands of video feeds, enabling effective monitoring of large facilities or multiple locations from a centralized interface. This scalability is complemented by its user-friendly web-based interface, which allows operators to access the system remotely, providing flexibility and convenience.

In terms of technology, the KT-400 employs advanced video analytics capabilities. These analytics enhance security measures by allowing the system to detect unusual activities, such as unauthorized access or suspicious behavior, reducing reliance on manual monitoring. The analytics can send instant alerts, which can significantly improve response time during security incidents. Integration with other security systems, such as access control and intrusion detection systems, further enhances its effectiveness.

The KT-400 is designed for high-performance video recording, featuring high-resolution recording capabilities that ensure clear and detailed footage, crucial for identification purposes. The system also supports various compression standards, optimizing storage use while maintaining video quality. Coupled with its redundancy features, such as failover capabilities, the KT-400 ensures that critical video data is preserved even in the event of hardware failures.

Moreover, the KT-400 supports a wide range of camera types, including IP and analog cameras, making it a versatile choice for existing legacy systems as well as new installations. This compatibility, along with support for various video formats, allows for seamless integration, providing users with the flexibility to design their surveillance systems according to their needs.

In conclusion, the American Dynamics KT-400 stands out for its scalability, advanced video analytics, high-performance recording, and broad compatibility with different camera types. These features make it an ideal choice for organizations looking to enhance their security management and respond swiftly to potential threats. With ongoing technological advancements, the KT-400 is poised to remain a reliable choice in the evolving security landscape.