American Dynamics KT-400 Connect readers and keypads, Reader Connection Terminal Warning

Page 24

Warning: Controlled door locks may be governed by regulatory bodies and should always be installed according to local regulations. In most instances, there are strict limitations to installing fail-secure devices and fail-safe locking devices such as magnetic locks or other similar locking devices on doors used as emergency exits.

Hooking Up Inputs

Connect devices to inputs 1 to 16

Resistors for all inputs 5.6K ohm (if selected)

The KT-400 has an on-board capability of monitoring 16 input points (expandable to 256 with expansion modules). Each onboard input is supervised with or without end-of-line resistors (5.6K ohm). The maximum distance of one line is 600 m (2,000 ft) with AWG #22 in a single or double EOL configuration.

Note: Onboard Inputs can be defined with: none, single or double EOL (End-of-Line) resistor(s) according to your EntraPass software settings.

Inputs 1-2 are automatically reserved for the first controlled door. The contact is assigned input 1 and the associated request-to-exit detector as input 2. Inputs 5 and 6 are automatically reserved for the second controlled door. The contact is assigned input 5 and the associated request-to-exit detector as input 6. Inputs 9 and 10 are automatically reserved for the third controlled door. Inputs 13 and 14 are automatically reserved for the fourth controlled door. There is no obligation to follow these rules but this standard convention facilitates servicing.

Connect readers and keypads

READER CONNECTION TERMINAL WARNING

Connecting the red wire lead (or power lead) of a 5 VDC reader to the 12 VDC terminal may damage the reader. See your reader

installation procedure for proper power connection. Up to 4 readers can be connected to a KT-400. They can be installed on one door to control both entry and exit or on four separate doors operating independently to control one-way access. The distance between the readers and the KT-400 varies by reader type (please consult the installation manual for details). Auxiliary outputs provide visual and/or audible access operation feedback at the controlled door. Outputs “READER DOOR 1 - OUT1 OUT2 LED & BUZ” are used for the first door, “READER DOOR 2 - OUT1 OUT2 LED & BUZ” are used for the second door, “READER DOOR 3 - OUT1 OUT2 LED & BUZ” are used for the third door and “READER DOOR 4 - OUT1 OUT2 LED & BUZ” are used for the fourth door.

20

DN1726-0811

Page 23 Page 25
Image 24
Page 23 Page 25
Contents KT-400 Page Table of Contents Installation Checklist Inputs and Outputs Assignments Sheet Pre-Installation Information Technical Support Compliance Specifications FCC & IC Compliance UL ComplianceUL 294 Compliance Notice UL 1076 Compliance NoticeDN1726-0811 Multiple Configuration Options OverviewInputs Trouble and Reporting KT-400 Ethernet Four-Door Controller PCB View KT-400 KT-400 Cabinet Model for North America System Architecture DN1726-0811 Over the internet with a KT-NCC and EntraPass Global Edition Vital LED Heartbeat Patterns Vital LED Heartbeat PatternsTechnical Specifications Type DescriptionElectrical Specifications TypicalExpansion Modules Models Related DocumentationDimensions Drawings Part number DescriptionMiscellaneous Items Models Information DN1762, FigureInstalling the KT-400 Ethernet Four-Door Controller Earth Grounding AWG #18 grounding wire to EgndConnect readers and keypads Reader Connection Terminal WarningTamper Protection Install tamper switch on cabinet Relay Controlled OutputsConnecting the KT-400 Ethernet Four-Door Controller BluePowering the KT-400 Ethernet Four-Door Controller Connecting over Corporate Network LANSPI Expansion Port Example of current draw calculationImportant Installation Rules about Expansion Modules KT-MOD-CAB Dimensions Drawing in DWG FormatPCB View of Expansion Modules With Expansion ModulesEthernet Four Expansion Modules Cabinet for North America Troubleshooting Soft ResetDefault initialization KT-400 Factory Default StepsBi-annual test for battery Annual test for emergency lithium ion batteryOptional Documentation Make sure the KT-400 is in Factory Default Dhcp mode. See on Important The KT-Finder application isVerify your Network Configuration Information Sheet KT-400 Ethernet Four-Door Controller EntraPass Site KT-400 Ethernet Four-Door Controller SiteInstallation Checklist Installing the KT-400 Ethernet Four-Door ControllerInputs and Outputs Assignments Sheet No or NC EOL, DRY or DeolKT-400 Cabinet Inner Door Sticker Diagram North America DN1726-0811

KT-400 specifications

The American Dynamics KT-400 is a robust and versatile video management system designed for a wide range of security applications. As a part of American Dynamics' extensive lineup of surveillance solutions, the KT-400 caters to various industries, including retail, transportation, and critical infrastructure, enabling efficient surveillance and management of video data.

One of the main features of the KT-400 is its exceptional scalability. The system can support a large number of cameras, making it suitable for both small and expansive enterprises. Users can easily manage thousands of video feeds, enabling effective monitoring of large facilities or multiple locations from a centralized interface. This scalability is complemented by its user-friendly web-based interface, which allows operators to access the system remotely, providing flexibility and convenience.

In terms of technology, the KT-400 employs advanced video analytics capabilities. These analytics enhance security measures by allowing the system to detect unusual activities, such as unauthorized access or suspicious behavior, reducing reliance on manual monitoring. The analytics can send instant alerts, which can significantly improve response time during security incidents. Integration with other security systems, such as access control and intrusion detection systems, further enhances its effectiveness.

The KT-400 is designed for high-performance video recording, featuring high-resolution recording capabilities that ensure clear and detailed footage, crucial for identification purposes. The system also supports various compression standards, optimizing storage use while maintaining video quality. Coupled with its redundancy features, such as failover capabilities, the KT-400 ensures that critical video data is preserved even in the event of hardware failures.

Moreover, the KT-400 supports a wide range of camera types, including IP and analog cameras, making it a versatile choice for existing legacy systems as well as new installations. This compatibility, along with support for various video formats, allows for seamless integration, providing users with the flexibility to design their surveillance systems according to their needs.

In conclusion, the American Dynamics KT-400 stands out for its scalability, advanced video analytics, high-performance recording, and broad compatibility with different camera types. These features make it an ideal choice for organizations looking to enhance their security management and respond swiftly to potential threats. With ongoing technological advancements, the KT-400 is poised to remain a reliable choice in the evolving security landscape.
Top Page Image Contents