American Dynamics KT-400 installation manual Pre-Installation Information

Page 5

KT-400 Ethernet Four-Door Controller Installation Manual

Pre-Installation Information

To the Installer: If you are familiar with the installation, you can use the installation checklist on page 37 with the symbol.

Copyright Information

Copyright © 2008 Tyco International Ltd. and its Respective Companies. All Rights Reserved. All specifications were current as of publication date and are subject to change without notice. EntraPass, Kantech and the Kantech logo are trademarks of Tyco International Ltd. and its Respective Companies.

Safety Instructions

Important: NEVER INSTALL THE EQUIPMENT DURING A LIGHTNING STORM!

This equipment, KT-400 Ethernet Four-Door Controller, shall be used installed and used within an environment that provides the pollution degree max 2 and over voltages category II NON HAZARDOUS LOCATIONS, INDOOR only. The equipment is FIXED and PERMANENTLY CONNECTED and is designed to be installed by Service Persons only; [service person is defined as a person having the appropriate technical training and experience necessary to be aware of hazards to which that person may be exposed in performing a task and of measures to minimize the risks to that person or other persons.] The equipment is installed in a metallic cabinet that meets the applicable requirements for a FIRE ENCLOSURE.

1.The connection to the mains supply must be made as per the local authorities rules and regulations: In the UK as per BS6701. An appropriate disconnect device must be provided as part of the building installation. Where it is not possible to rely on the identification of the NEUTRAL in the AC MAINS SUPPLY, the disconnecting device must disconnect both poles simultaneously (LINE and NEUTRAL).

2.AVOID setting up the equipment near heaters, air conditioners, ventilators, and/or refrigerators;

DO NOT select a place that exposes your controller to direct sunlight, excessive heat, moisture, vapors, chemicals or dust.

3.If during the installation a knockout on the cabinet is removed, it is the installer's responsibility to ensure that the same degree of protection for the cabinet is provided by the use of bushings, fittings, adequate sealant, etc.

4.The metallic cabinet must be secured to the building structure before operation. Use four (4) stainless steel tapping screws #8, 32 mm (1.25 in) to mount the cabinet.

5.The ground connection must be as shown within the included diagram, or equivalent.

6.Internal wiring must be routed in a manner that prevents:

-Excessive strain on wire and on terminal connections;

-Loosening of terminal; connections;

-Damage of conductor insulation.

7.It is the end-user and/or installer's responsibility to ensure that the disposal of the used batteries is made according to the waste recovery and recycling regulations applicable to the intended market.

8.There are no serviceable parts within the equipment; For any issues regarding the equipment please contact your installer.

9.DISCONNECT POWER BEFORE SERVICING.

DN1726-0811

1

Page 4 Page 6
Image 5
Page 4 Page 6
Contents KT-400 Page Table of Contents Installation Checklist Inputs and Outputs Assignments Sheet Pre-Installation Information Technical Support UL Compliance Compliance Specifications FCC & IC ComplianceUL 294 Compliance Notice UL 1076 Compliance NoticeDN1726-0811 Overview Multiple Configuration OptionsInputs Trouble and Reporting KT-400 Ethernet Four-Door Controller PCB View KT-400 KT-400 Cabinet Model for North America System Architecture DN1726-0811 Over the internet with a KT-NCC and EntraPass Global Edition Vital LED Heartbeat Patterns Vital LED Heartbeat PatternsType Description Technical SpecificationsTypical Electrical SpecificationsExpansion Modules Models Related DocumentationMiscellaneous Items Dimensions DrawingsPart number Description DN1762, Figure Models InformationEarth Grounding AWG #18 grounding wire to Egnd Installing the KT-400 Ethernet Four-Door ControllerReader Connection Terminal Warning Connect readers and keypadsRelay Controlled Outputs Tamper Protection Install tamper switch on cabinetBlue Connecting the KT-400 Ethernet Four-Door ControllerConnecting over Corporate Network LAN Powering the KT-400 Ethernet Four-Door ControllerExample of current draw calculation SPI Expansion PortKT-MOD-CAB Dimensions Drawing in DWG Format Important Installation Rules about Expansion ModulesPCB View of Expansion Modules Ethernet Four WithExpansion Modules Expansion Modules Cabinet for North America Soft Reset TroubleshootingKT-400 Factory Default Steps Default initializationAnnual test for emergency lithium ion battery Bi-annual test for batteryOptional Documentation Important The KT-Finder application is Make sure the KT-400 is in Factory Default Dhcp mode. See onVerify your Network Configuration Information Sheet KT-400 Ethernet Four-Door Controller KT-400 Ethernet Four-Door Controller Site EntraPass SiteInstalling the KT-400 Ethernet Four-Door Controller Installation ChecklistNo or NC EOL, DRY or Deol Inputs and Outputs Assignments SheetKT-400 Cabinet Inner Door Sticker Diagram North America DN1726-0811

KT-400 specifications

The American Dynamics KT-400 is a robust and versatile video management system designed for a wide range of security applications. As a part of American Dynamics' extensive lineup of surveillance solutions, the KT-400 caters to various industries, including retail, transportation, and critical infrastructure, enabling efficient surveillance and management of video data.

One of the main features of the KT-400 is its exceptional scalability. The system can support a large number of cameras, making it suitable for both small and expansive enterprises. Users can easily manage thousands of video feeds, enabling effective monitoring of large facilities or multiple locations from a centralized interface. This scalability is complemented by its user-friendly web-based interface, which allows operators to access the system remotely, providing flexibility and convenience.

In terms of technology, the KT-400 employs advanced video analytics capabilities. These analytics enhance security measures by allowing the system to detect unusual activities, such as unauthorized access or suspicious behavior, reducing reliance on manual monitoring. The analytics can send instant alerts, which can significantly improve response time during security incidents. Integration with other security systems, such as access control and intrusion detection systems, further enhances its effectiveness.

The KT-400 is designed for high-performance video recording, featuring high-resolution recording capabilities that ensure clear and detailed footage, crucial for identification purposes. The system also supports various compression standards, optimizing storage use while maintaining video quality. Coupled with its redundancy features, such as failover capabilities, the KT-400 ensures that critical video data is preserved even in the event of hardware failures.

Moreover, the KT-400 supports a wide range of camera types, including IP and analog cameras, making it a versatile choice for existing legacy systems as well as new installations. This compatibility, along with support for various video formats, allows for seamless integration, providing users with the flexibility to design their surveillance systems according to their needs.

In conclusion, the American Dynamics KT-400 stands out for its scalability, advanced video analytics, high-performance recording, and broad compatibility with different camera types. These features make it an ideal choice for organizations looking to enhance their security management and respond swiftly to potential threats. With ongoing technological advancements, the KT-400 is poised to remain a reliable choice in the evolving security landscape.
Top Page Image Contents