Microtest TSB-67 - 568A Annex E manual Extended Functions, Setting Up the Traffic Monitor

Page 47

Setting Up the Traffic Monitor

To display this screen, press the Analyze LAN Traffic key, then Setup (F4).

This screen lets you change the traffic-sampling interval for the network activity monitor.

Press Change (F2) to toggle through the available interval options.

Press Save (F1) to store the new setting and exit or press the ESCAPE key to exit without saving.

Chapter 8: Extended Functions

Extended Functions Menu

This screen displays the Extended Functions available for the Scanner. Press the ∇ or key to scroll through the available options. Or, press the ∉ or ∠ key to scroll up and down one screen at a time. Press Select (F1) to choose the highlighted option, or press the number on the keypad that corresponds to the option you want.

∙Select Autotest Memory to manage, view, print and clear saved test results.

∙Select Setup Autotest to set the default Autotest, edit Autotest names, select pairs to test and/or to include in PASS/FAIL criteria, select the tests to run and customize test limits.

∙Select Calibrate Injector to calibrate the Injector.

∙Select User Preferences to edit the owner or company name, specify backlight and auto shutoff time limits, set length units, configure the printer port, or set the date and time. Note: The PentaScanner and PentaScanner Cable Admin display the units, printer port, and date/time items on the main EXTENDED FUNCTIONS menu.

∙Select Injector Info to display Injector software, hardware and calibration information.

∙Select Cable Trace to send a traceable signal down a length of attached cable. (PentaScanner+ only.)

∙Select Office Locator to determine the room and wall outlet to which a length of cable leads. (PentaScanner+ only.)

Note: The PentaScanner and PentaScanner Cable Admin EXTENDED FUNCTIONS menu contains an additional item, LAN Monitor. This item is identical to the LAN Monitor Setup function under the Analyze LAN Traffic key. The PentaScanner and PentaScanner Cable Admin also displays units, printer port, and date/time setups under the main EXTENDED FUNCTIONS menu, not under the USER PREFERENCE menu.

Autotest Memory

To display the MEMORY screen, press the Extended Functions key, then select Autotest Memory. This screen lets you view, print or delete the Autotest results you have stored in memory.

Press the ∇ or arrow key to scroll through the list of stored tests (or ∉ to page up and © to page down) then press Select (F2) to choose the highlighted test.

Press View (F1) to display the selected test.

Press Print (F3) to print all or selected test results.

Page 47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents N t a S c a n n e r O d u c t F a m i l y E r G u i d e Introduction Ready Screen Charging the Scanner’s BatteryNi-Cd Battery Scanner and 2-Way Injectors Getting StartedPentaScanner+ is in battery refresh mode Way Injector+/2-Way Injector BatteryNi-Cd Battery Tips Battery Refresh ModeTest Connectors Super Injector+/Super Injector BatteryFail Way Injector+/2-Way Injector LED IndicatorsHigh Voltage Protection PassCircuit Super Injector+/Super Injector LED IndicatorsWhen to Use the Injector ChargingInjector Calibration Using Multiple InjectorsPress the Extended Functions key Mod 8 Adapter NoteCalibration Connections Connections Basic Link with IDC Block and Modular 8 Jack Basic Link with Modular 8 JacksFull Channel Modular 8 Link Autotest Extended Functions key and select Calibrate Injector Steps for Running AutotestSelecting the Cable Type Calculating NVP Editing the Cable TypeEditing the Autotest Name Customizing AutotestEditing Autotest Information Selecting Tests to Run During Autotest Selecting Pairs for AutotestAutotest Results Screen Editing Test LimitsRunning Autotest Viewing Autotest Results Wire MapWire Map Test Results Length Test Results LengthCustomizing Length Limits Measuring Next at Both Ends of the Link Propagation Delay Customizing Delay LimitsPropagation Delay Test Results Near End Crosstalk NextNext Test Results Customizing Next LimitsAttenuation Next DetailNext Graph Editing Attenuation Limits Customizing Attenuation LimitsAttenuation Limits and Frequency Attenuation-to-Crosstalk Ratio ACR Attenuation Test ResultsAttenuation Detail Attenuation GraphISO Class D Customizing ACR LimitsACR Test Results ImpedanceLoop Resistance Customizing Impedance LimitsImpedance Test Results Customizing Capacitance Limits Customizing Loop Resistance LimitsLoop Resistance Test Results CapacitanceSaving Autotest Results Capacitance Test ResultsViewing Autotest Results Summary Save Sweep DataPrinting Autotest Results Sample Autotest Report Editing with the Arrow Keys Editing, Printing & UpdatingEditing with the Alphanumeric Keypad Memory, then press Print F3 Printing or Downloading Test ResultsUploading Autotest Reports to Windows Terminal Printing TipsProcomm Plus for Windows Problem My printout is garbled. Why? Troubleshooting Printing ProblemsUpdating Scanner Software from the PC Downloading Software UpdatesOne or more stored Autotest results have been lost Updating the 2-Way Injector+/2-Way InjectorWaiting for Reflash Download of Flash image file complete Technical SupportWorld Wide Web Penta -C1FaxFacts Find Cable FaultsMicrotest Bulletin Board System BBS Short at the Scanner End Wire Map for Both Ends of the LinkCross Wiring Short at the Injector EndGraph F1 Measure Cable PerformanceAttenuation Next SweepAttenuation Limits Noise Length/DelayImpulse Noise LAN Traffic Display Analyze LAN TrafficPeak-to-Peak Noise Autotest Memory Setting Up the Traffic MonitorExtended Functions Extended Functions MenuCalibrating the Injector Autotest SetupEditing Owner/Company Name Setting Up User PreferencesSetting Backlight and Auto Shutoff Times Setting Up UnitsSelecting a Graphics Printer Setting Up the Printer PortSetting the Date and Time Locating an Office Cable Drop Appendix a SpecificationsDisplaying Injector Information Tracing a CableMeasurement Ports Wire MapUser Interface EnvironmentalAttenuation LengthNear-End Crosstalk Next Impulse Noise ImpedanceLoop Resistance CapacitanceLED Displays Rechargeable BatteryPower Control High Voltage Input/ProtectionFeatures Way Injector+ Next Measurement Performance SpecificationsSuper Injector+/Super Injector Physical Characteristics Environment Appendix B 150 ohm CablesWorking with 150 Ohm Cables Creating a Cat 5 Test for Token RingSerial Cable DB-9 Female to DB-9 Male Pin-outs Appendix C Cable Pin-outsCable Pin-outs Press Save F1Appendix D Working with Coaxial Cable Length/Delay Test Results Peak-to-Peak Noise Test Results Impulse Noise Test Results
Top Page Image Contents