Contents
| To set the “Specialty Paper” function | |
| Specifying the Output Tray Priority | |
| To set the “Priority exit tray” function | |
| To set the “Intelligent Sorting” function | |
| To set the “Criss Cross Mode” function | |
| To set the “Priority Device” function | |
| To set the “ACS Judgement Level Adjust.” function | |
| To set the “2in1, 4in1, Booklet Copy Zoom” function | |
| To set the | |
| To set the “4in1 Copy Order” function | |
| To set the “Centering” function | |
5.3 | Viewing Counters (“Meter Count” Function) |
5.4Viewing Part Maintenance Levels
| (“Unit life indicator” Function) | |
5.5 | Administrator Mode Operations | |
| To set the “Top Erase” function | |
| To set the “Disable Sleep Mode” function | |
| To set the “over size paper selection” function | |
| To set the “Language Selected” function | |
| Specifying Expert Mode functions | |
| To set the “Thick Paper and OHP Film Image Density” |
|
| function | |
| To adjust the color shifts manually | |
| To set the “Monochrome Image density correct” function | |
| To set the “Stabilizer” function | |
| Setting the “PRT Area” Functions | |
| To set the “PRT Area (Top Margin)” function | |
| To set the “PRT Area (Left Margin)” function | |
| To set the “PRT Area (Dup. Left Margin)” function | |
| To set the “Center Binding Position” function | |
| To set the “Gradation Adjust” function | |
| To set the “Stabilizer” function |
|
| (if the image is still incorrect, even after the gradation levels |
|
| have been adjusted) |
5.6 | Supervising Copier Use (Copy Track Functions) | |
| Setting the Copy Track Functions | |
| Specifying Account Settings | |
| To set the “Copy Track Mode” parameter | |
| To print a “Copy Track Data” counter | |
| To initialize a “Copy Track Mode” counter | |
| To specify settings for a “Copy Track Data” counter | |
| To specify permissions for an account | |
| To apply the specified limits |
CF2002/CF3102 | iii |