5.2 Specifying Default Settings (“User’s Choice” Functions)
To set the “Auto-select Paper for Small Original” function
5
This function is used to select whether or not to print documents with a size that is too small and cannot be automatically detected. (The default settings are “ON” and the 1st drawer.)
If this function is set to “Off”, copies cannot be made under either of the following conditions.
✔When the [Start] key is pressed with the Paper setting “Auto Paper” selected, but the size of the document is too small to be detected and the paper cannot be selected
✔When the [Start] key is pressed with the Paper setting “Auto Paper” selected, but no document has been loaded
Tip
If this function is set to “ON”, copies will be made even under the conditions described above.
In this case, since the document size cannot be detected and the paper cannot be automatically selected, the paper (source) must be selected.
1Press the [Utility] key.
2Touch [User’s Choice: 2].
3Touch [2/2].
4Touch
Utility Mode Operations Chapter 5
CF2002/CF3102 |