Minolta CF2002 manual 0 mm ± 0.5 mm

5.5 Administrator Mode Operations 5

9Check that the top margin of the test

pattern is between

4.5 mm and 5.5 mm. If

the top margin is within	a
the specified range,
skip to step 14.

a: 5.0 mm ± 0.5 mm

10 If the top margin is less than 4.5 mm, touch to specify the desired positive adjustment (between +0.1 mm and +3.0 mm).

11 If the top margin is more than 5.5 mm, touch to specify the desired negative adjustment (between -0.1 mm and -3.0 mm).

12 Press the [Start] key. The adjusted test pattern is printed on 11 ⋅ 17-size paper.

13 Check the print result to make sure that the top margin is adjusted to between 4.5 mm and 5.5 mm.

❍If more adjustment is necessary, return to step 8 and repeat the adjustment procedure.

14 Touch [Enter].

15 Touch [Fin. Time] again in the next three screens that appear.

Utility Mode Operations Chapter 5

CF2002/CF3102 5-49