Features and Options, Model specific features

A470e Users Guide

Features and Options

This manual covers several models and describes features and options which do not apply to all versions. Refer to the model list below to determine which features your printer supports.

Standard Features:
Interfaces	RS-232 DB9 Serial, USB.
Memory/Firmware	Flash Memory.
Resident Character Sets	A470 PCL; US, UK, French, German, Italian, Spain I
Dual Cash Drawer	Connectors for two Cash Drawers.
Paper Low Sensor	Status (LED) indicator on front of printer.
Form In Sensor	Slip In (LED) indicator on front of printer.
One Button Setup	No dip switches, access to printer settings through one button
	configuration menu.

Model specific features:

MODEL	REWIND	RECEIPT	VALIDATION	FEED TYPE *	CASE SIZE
4810	Y	Y	N	-	LONG 11.54”
4811	Y	Y	Y	I	LONG 11.54”
4812	Y	Y	Y	C	LONG 11.54”
4870	N	Y	N	-	SHORT 8.3”
4871	N	Y	Y	I	SHORT 8.3”
4872	N	Y	Y	C	SHORT 8.3”
4874	N	N	Y	-	SHORT 8.3”

* FEED TYPE:

I - Independent feed printers provide either roll paper or validation media feed at any given time depending on which print mode has been selected. This feature saves roll paper media during validation printing.

C - Concurrent feed printers provide both roll paper and validation media feed at the same time. This feature provides a roll paper copy of the printed validation message when self-contained roll paper is used. Validation media is not required for normal roll paper printing.

V - Validation only printers do not support roll paper printing functions.

Pertech® 2006