A470e Users Guide
Configuration Mode
For journal and receipt printers, at the completion of the Configuration Report, the printer will allow access to the Configuration Mode. Validation only printers will need to be configured through the use of Command Codes. To enter the Configuration Mode press the Paper Feed Button within 10 seconds. If the button is not pressed within this time limit, the printer will resume normal operation. When the printer is in the Configuration Mode each configuration option will be printed and the user will have 10 seconds to either change that option or to continue on
to the next option. Changes are made by pressing the Paper Feed Button. After the user has completed the configuration the printer will print out its new configuration and return to normal operation.
The first option for each available option is the default setting. Some options are only available for specific Control Languages.
Printer configuration options:
Printer Control Language:
PCL:
A470 Language
ACL Mode(Advanced Command Language)
Mode 1 (DO214)
Mode 2 (ZC2979)
Mode 3 (ZC5979)
Diagnostic Mode:
Standard Print
Hex Dump
Auto line feed:
CR=CR + LF (Line Feed)
CR =CR (Carriage Return)
ACK on CR (ZC5979 Only)
Enabled
Disabled)
Soft Fault Recover (ACL Mode Only).
Host Controlled
Automatic
Pertech® 2006 | 14 |