Agilent Technologies Agilent E6474A manual GPS and GPS/DR, Agilent digital receiver internal GPS

Set Up Your System 3

GPS and GPS/DR

Overview

To provide accurate measurement analysis and signal synchronization, the Agilent E6474A system provides comprehensive methods of support for Global Positioning Systems (GPS).

The Agilent E6474A system obtains its GPS signal from a variety of sources. GPS systems can be connected and configured using the following methods:

GPS and GPS/DR configuration	Refer to
Agilent digital receiver internal GPS	page 47
Agilent digital receiver external GPS	page 47
External GPS using the E6473B hub	page 51
Agilent GPS/DR navigator	page 51
Indoor positioning	page 54

Agilent digital receiver internal GPS

All Agilent digital receivers are supplied with an internal GPS system. When an Agilent digital receiver is connected to your system, this GPS device is automatically detected. GPS signals are passed to your system through the serial connection.

Agilent digital receiver external GPS

The following examples show a complete system with various external GPS systems attached through an Agilent digital receiver. These examples show the external GPS and receiver connected to a PC, however the same connection can be made to the AUX port on the E6473B hub. Refer to Figure 18 on page 48.

Agilent E6474A User’s Guide 47