Agilent Technologies Agilent E6474A manual File types and locations, Extension

Use Your System 4

File types and locations

The Agilent E6474A system generates and uses different files. The following list describes these files in terms of their function and location.

File type	File	Description
	extension
Plan File	.spf	Created when you save a project. You can
		select any location for this file.
Environment File	.sef	Contains information about view settings in
		the above plan file. This file is generated
		automatically in the same location as the plan
		file.
Object Control File	.ocf	Contains information about each view that
		makes up the plan file you created in the
		system setup view and in the E6474A
		software. This file is generated automatically
		in the same location as the plan file.
Data file	.sd5	Contains the recorded measurement data.
		This file can be stored in any location. It is
		recommended that the data file is saved in
		the same location as the plan file.
Export plan file	.epf	Contains the Export Wizard settings. Refer to
		the online help for more information on using
		the Export Wizard. This file can be stored in
		any location. It is recommended this file is
		saved in the same location as the plan file.

NOTE

If you need to transfer a project to another laptop, it is recommended that you copy the plan (.spf), environment (.sef), and object control files (.ocf) at the new laptop.

Agilent E6474A User’s Guide 87