Agilent Technologies Agilent E6474A manual Adding a data device, To add a device to the data port

4Use Your System

Adding a data device

Use the data port in the System Setup view to set up the device and data properties. In the System Setup view, up to four devices can be added to the data port. Properties for the data device can then be configured, in a manner similar to a phone.

To add a device to the data port:

1Right-click on the Data Port. A pop-up menu appears, as shown in Figure 44.

Figure 44 Adding a data device

2Choose Add Device from the pop-up menu. After you add the data device, it is enabled, as indicated by the check mark next to Data Device in Figure 45 on page 91.

90 Agilent E6474A User’s Guide