Agilent Technologies Agilent E6474A manual Set Up Your System

WARNING

Set Up Your System 3

Always use the battery charger provided with the battery.

Never heat or incinerate the battery.

Never impact, pierce, or crush the battery.

Never disassemble or modify the battery. The battery contains a circuit designed to enhance safety. Damaging this circuit may cause overheating, fire or bursting.

Never charge a battery under high temperature conditions, such as near a fire or in the direct sunlight. If the ambient temperature is too high, the protection circuit may be actuated, preventing further charging, or damage.

Never short-circuit the battery by connecting the positive and negative terminals with a metal material.

Do not store or carry the battery where it could come into contact with metal objects such as a key chain or necklace.

Never allow the battery to get wet or be immersed in water.

Do not place the battery in a microwave oven or high-pressure container.

Stop charging if the battery is not charged after the prescribed charge time.

If leakage of the electrolyte occurs, or if there is an offensive odor, keep the battery away from any source of fire or spark.

If you become aware of any abnormal phenomena, such as odor, discoloration, or deformation, during use, while charging, or when storing the battery, remove the battery from the device or charger and stop using.

In the event the electrolyte comes into contact with the eyes, flush thoroughly with clean water, without rubbing. Consult with a physician immediately.

Agilent E6474A User’s Guide 57