About this guide | Agilent Technologies Agilent E6474A specs

Welcome to Agilent E6474A Wireless Network Optimization Platform

Thank you for choosing Agilent Technologies. In this User’s Guide, you will find the instructions you need to setup the hardware and begin using the software to take measurements.

About this guide

This guide contains installation and operating instructions for the Agilent E6474A Wireless Network Optimization Platform software, as well as instructions for using the Agilent E6473B High Speed Direct Connect Hub.

See this chapter		For this information

1	Get Ready	A list of tasks to perform before you get started.

2	Install the Software	Instructions for Installing the E6474A software.

3	Set Up Your System	Setup instructions and cable connections for each
		component of your systems.

4	Use Your System	•	Powering up systems.
		•	Starting the software.

5	Get Results Fast	• Using the Quick Basics to get started learning to
			use the E6474A.
		• Accessing and using online help.

6 Get Assistance, If You		•	Getting telephone support.
Need It		•	Frequently asked questions.
		• Returning systems for service.
		•	Solving problems.
		•	Contacting customer support.
		• Updating E645xx receiver firmware.

Appendix A, “Safety		Information to help you to use your system safely
and Regulatory
Information”

Appendix B,		A quick reference for the panel connectors and LED
“Connection Panels		indicators of the E6473B High Speed Direct Connect
and LED Indicators”		Hub, E645x receiver, the GPS/DR Navigation unit,
		and the Trimble Placer 455DR.

Agilent E6474A User’s Guide

3

Image 3

Agilent Technologies Agilent E6474A manual About this guide, See this chapter For this information

Contents

Agilent E6474A Wireless Network Optimization Platform Manual Part Number See this chapter For this information About this guide Connected to your vehicle System specifications, including softwareRecommendations for installing components Information Hardware options, and part numbers Contents External antennas E6473B high speed direct connect hub Use Your System Test 5 Phone testing using a test call Troubleshooting your E6474A systemSetting an iDEN phone’s baud rate Test 2 Receiver testing by measuring a known channel Safety and Regulatory Information E6452A Option 002/E6457C Japan cellular band receiver E6458C GSM 850 receiver specifications Index 181 Agilent E6474A User’s Guide Unpacking your boxes Get Ready Before installing the software To do this See this What you’ll find in this chapter What is on the CD Do This Install the E6474A software Analysis Reporter option Install Analysis Reporter software Install Adobe Reader software To install the Adobe Reader softwareTo view documents Once the installation has Software optionCompleted Uninstalling the Walkabout or VoicePrint software Uninstalling Existing SoftwareSelect Start button Start the software and check you license options Verifying your software installationAgilent Wireless Solutions E6474A E6474A An option will appear in your program listing Options Connected a valid license dongle Match your ordered license Installing the Software Overview Set Up Your System To do this Refer to E6473B High Speed Direct Connect Hub Your PC How to connect the E6473B hubSource Refer to Figure How to power your E6473B hub Power the E6473B hub from the in-vehicle lighter socketPowering the E6473B hub Refer to Power E6473B hub directly from lighter socket Power the E6473B hub using the in-vehicle chassis Power to vehicle ignition system Power the E6473B hub from a battery How to connect a license key dongle to the E6473B hub How to connect other devices to the E6473B hubSystem component Refer to Connecting two direct connect hub systems Verifying E6473B hub installationDirect connect hub connections Connect and switch on the E6473B hub Verifying installation using the Configuration Utility Enable Use Digital Loopback option Select Begin Test Select Start Settings Control Panel Verifying Installation using the Device Manager Direct serial port Pcmcia PC Card E6473B hub USB port Phone connection using direct serial portPhone connection using Phones Phone connection using the E6473B hub Phone connection using Pcmcia PC Card BC D E6473-803 Phone connection using a USB portExternal antennas Use with phones Adapter part number Adapter type Number Receiver configuration Agilent Digital ReceiversConnect multiple receivers Pulse trigger the receivers Serial port connection for Agilent digital receiver Connect directly to your laptop Connect to the E6473B hub Connect two receivers to your in-vehicle E6473B hubConnections for receiver Receiver To connect multiple receivers Connect multiple receivers Pulse trigger the receiver Connecting more than one receiver to your laptop Connecting the pulse trigger cable Agilent digital receiver external GPS GPS and GPS/DR configurationGPS and GPS/DR Agilent digital receiver internal GPS Internal GPS with optional differential GPS Example 2 Using Placer GPS External GPS Placer Example 3 Placer 455 with differential GPS Placer 455 GPS with differential GPS Agilent GPS/DR navigator External GPS using the E6473B hub Method 1 In-vehicle chassis Method 2 USB connectionMethod 3 Serial connection Gyro positioning Connecting the Speed Pulse Color Connection Indoor positioning LEDs Lit Capacity Remaining Charging the batteryBatteries Checking the remaining charge Safe handling and disposal Set Up Your System Portable system cable connections Indoor SetupCarry pack final assembly Using carry pack assembly with the shoulder strap Side view of the carry pack showing the shoulder strap Using the carry pack as a backpack Carry pack inside view Portable digital receiver system Chassis and backpack assembly Single receiver backpack right side view Final assembly Portable dual E645xx receiver system Using the single-receiver backpack Cable routing within the backpack Inside the backpack Cable routing through the shoulder straps Routing cables through the shoulder straps Receiver and hub mounting Cable connections to the receiver Cable connections to the E6473B hub Dual receiver backpack final assembly Backpack exterior features Tightening the shoulder straps on the backpack Adjusting the backpack harness License Manager IntroductionFor more information Identifying devices Use Your System E6473B high speed direct connect hub Battery charging LEDs and display during power-up Agilent direct connect GPS/DRDetermining GPS receiver status Calibration of dead reckoning To start the software Starting the software To check your license options Confirm you license options Creating a new project To create a new plan System Setup view Identifying devices Identify devices System setup view showing pop-up menu Enabling the devices System Setup View with a phone identified on COM To configure a device Configuring devices and views An example of a device properties dialog box To configure measurement views Use Your System File types and locations File typeExtension Add a modem connection to the computer Configuring and creating a data projectConfigure the phone Generic data devices Testing the phone/modem configuration Configure the network and dial-up connection To add a device to the data port Adding a data device Data device added Configuring data device properties Configuring and creating a Wams project Option To configure a Wams sequenceTo start the Wams interface Software Get information about Learn to use E6474A Quick Basics tutorial Using Quick Basics the Online Tutorial Reference Tutorial To run the tutorialAfter the Tutorial Do this See this Online Help Accessing Online Help Typical online help browser display Getting familiar with new features Using Online Help Getting Information about Views Using the contents tabUsing the index tab Using the search tab 100 Service on Solve problems with your systemUpdate E645xx receiver firmware Return the system for service Remedies Troubleshooting your E6474A systemDevice communication problems Causes Changing a Sagem phone’s operating mode Setting an iDEN phone’s baud rate Toshiba C-103T Toshiba phone power-up issuesToshiba direct-connect phone power-up Toshiba 10-CT Agilent E6474A User’s Guide 105 Preparing the hardware Test 1 Receiver testing using a signal generatorVerifying your System Overview Agilent E6474A User’s Guide 107 Preparing the software ModelMHz at -60 dBm Testing the signal Umts E6455C receivers Mhz at -60 dBm Signal Generator Downlink Settings Passing the test Accuracy Test 2 Receiver testing by measuring a known channel Agilent E6474A User’s Guide 113 System Configuration for Measuring the Noise Floor Test 3 Receiver testing by measuring the noise floor Agilent E6474A User’s Guide 115 837 MHz Test 4 GPS receiver testingModel Marker 1 Frequency step 882 MHz Setting up the hardware Test 5 Phone testing using a test call Testing the phone Online Frequently Asked Questions Updating E645xx Receiver Firmware Firmware upgrade required, first dialog box Agilent E6474A User’s Guide 121 Firmware update successful dialog box Replacement firmware security key Contacting Customer Support Technical telephone assistanceNumbers to call Warranty repair Returning the System for Service Do This Additional Information Preparing the system for shipping Retain copies of all shipping papers General safety considerations Safety and Regulatory Information Safety and Regulatory Information Installation, Use, and Storage Productdamage Signal and input power Symbols 11,2*11 Supplementary Information Declaration of Conformity Agilent Direct Connect Hub For this information See this Reference Name Description or Cable Connection Flashes when phone data is receivedFlashes when phone data is transmitted Direct Connect Hub front panel descriptions see Figure Aux Auxiliary Data Port Pwr Power Input connection Connect to main power cable E645xx Receiver Agilent High Speed Direct Connect GPS/DR Navigation Pwr Power Input RS232/1PPSFront panel Trimble Placer GPS 455DR 140 For this See this Information/Requirements Computer Hardware and Software Requirements Item Description Specifications Battery Specifications part of E6473B, options 022, 023,Charger specifications part of E6473B Options 022, 023, Battery disposal Power cable Description E6473B High Speed Direct Connect Hub Specifications E6450C CDMA/TDMA PCS 1.9 GHz receiver specifications Receiver Specifications Description Specification MiscellaneousInternal GPS‡ Option To 50% relative humidity at 40C E6451A/E6451C GSM900 receiver specifications Power options 300, 320 To 34 V DC, 9W Internal GPSOption E6452C CDMA/TDMA cellular band receiver specifications Internal GPS** Option 100 240 Volts AC 50 60 Hz Accuracy, 30 kHz if Storage temperature range 40C to +70CAccuracy, 1.25 MHz if ±3 dB from 40 dBm to 50 dBm 0 to 55C Agilent E6474A User’s Guide 153 E6453C GSM1800 and Korean Cdma band receiver specifications Internal GPS‡ E6454C 1.9 GHz CDMA/GSM1900 receiver specifications Agilent E6474A User’s Guide 157 DBm for 1.25 MHz -115 dBm for 5 MHz E6455C 2.1 GHz W-CDMA/UMTS/cdma2000 receiver specificationsAccuracy 1.25 MHz if Accuracy, 5 MHz if GPS Receiver Channel internal GPS receiver Connector type E6456C 1.9 GHz W-CDMA/UMTS/cdma2000 receiver specifications Differential compatible without dead reckoning E6458C GSM 850 receiver specifications Agilent E6474A User’s Guide 163 E7456C iDEN/CDMA RF receiver specifications Agilent E6474A User’s Guide 165 To view a list of supported phones Phone Support Part Number Description Options and Part NumbersCable part numbers E6473B phone interface cable options Antenna kit part numbers Component Part Number Description Agilent receiversHardware included with E6474A software licenses Part Description 170 Antenna Computer mountCables Installation Guidelines Permanent In-Vehicle Hardware Installation D Mounting the E645x receiver Direct Connect Hub Installation Antenna Installation Installation guidelinesGPS antenna Cellular antennas Computer mount installation USB data cable Cable InstallationMain power cable Phone extender cables Power cable connections to the vehicle Connecting the ignition sense lead to the fuse blockIgnition sense lead Speed Pulse Cable 180 Add a data device BatteryConnection panels and LED indicators, 137 connections How to connect a license key Garmin II Plus GPS Epf filesFile types Lost Receivers Speed Pulse cable installation, 179 spf files In-vehicle lighter socket, 28 Power-upSef files Set up your system Battery Battery charger VoicePrint, 15 VoicePrint uninstallation