Agilent Technologies Agilent E6474A manual Configure the network and dial-up connection

NOTE

NOTE

Use Your System 4

Configure the network and dial-up connection

Instructions for configuring the network and dial-up Connection are included with the phone’s documentation. Follow the instructions explicitly. There are two parts to this procedure:

•Setting up the Internet Connection: In this part of the procedure, you set up the dial-up connection to your service provider. You need your service provider’s phone number.

•Advanced Connection Properties: In this part of the procedure, you set up the Dial Up Networking (DUN) properties, including the DNS and APN settings for your ISP. This information is available from your service provider.

It is recommended that you use a logical (and meaningful) name for the DUN connection name. You will select this as the Dial-up Name when you configure the Data Port Properties in the E6474A software. For example, include the phone type, service provider name, and Data Port connection number: Sagem-MyProvider-COM3.

Testing the phone/modem configuration

The following test verifies that all phone and modem settings are correct:

1Using the dial-up connection you have set up, establish a connection with the Internet.

Not all phones have integrated data and power supply connections. Ensure the phone is fully charged before proceeding. Connect the phone to a serial port of the computer, using the recommended connections given to you by the phone supplier.

2Open the browser on the computer.

3Attempt to browse the web.

4If this test is successful, then start the E6474A software, and proceed to “Adding a data device" on page 90.

Agilent E6474A User’s Guide 89