Agilent Technologies Agilent E6474A manual Enabling the devices

Use Your System 4

Figure 42 System Setup View with a phone identified on COM 1

Enabling the devices

Note that the check box next to each device is checked, indicating that the device is enabled for data collection. Phones and receivers are automatically enabled after you identify these devices. The navigator, however is not automatically enabled. Before you begin logging data or Live Mode, verify the following:

•Verify that each phone or receiver is enabled. Click the check box to enable the NMEA Navigator. The navigator supplies data to plot your position on the Route Map.

•Click the check box to enable the In-Building Navigator if you have E6474A, option 030, indoor mapping. This allows you to use the In-Building Route Map for manually plotting your test route.

•Click the check box to enable the Simulated Navigator when you need to isolate a problem, and do not require real navigation data.

Agilent E6474A User’s Guide 83