Agilent Technologies Agilent E6474A Method 1 - In-vehicle chassis, Method 2 - USB connection

3Set Up Your System

Method 1 - In-vehicle chassis

Connect using the in-vehicle chassis. Data and GPS information is passed to your PC through the E6473B hub. See Figure 22 on page 52.

Figure 22 GPS/DR system fitted into the in-vehicle chassis (shown with the E6473B hub)

Method 2 - USB connection

If the GPS/DR unit can not be fitted to the in-vehicle chassis it is possible to use the downstream USB port. Power is provided from the power socket at the back of the unit (power cable E6473-60004).

Method 3 - Serial connection

You can use the serial port on the back of the GPS/DR unit (refer to Figure 23). Connect this port to the serial port on your PC. The GPS/DR serial port overrides the USB port.

Figure 23 Serial port on GPS/DR unit

52 Agilent E6474A User’s Guide