Agilent Technologies Agilent E6474A manual Internal GPS

System Information C

Item	Description	Specification
	Weight	4.6 lbs (2.1 kg)
	Power	9 to 34 V DC, 10W
	Transformer AC Power (supplied with	100 - 240 Volts AC 50 - 60 Hz
	receiver)
	Support for Pulse triggering measurements
Internal GPS	GPS Receiver	8 Channel internal GPS receiver
	Connector type	SMA

Differential compatible without dead reckoning

Note: The internal GPS can be disabled if you wish to connect an external GPS system.

* It is recommended the input signal level not exceed – 40 dBm.

†Adjacent channel desensitization applies to wideband mode (5 MHz IF filter) and is defined as: 1 dB compression of tuned signal with interfering signal 5 MHz from tuned signal.

‡Adjacent channel rejection applies to the narrowband mode (1.25 MHz IF filter) and is defined as: Suppression of interfering signal ± 1.25 MHz from tuned signal.

Agilent E6474A User’s Guide 159