NordicTrack manual 20 3G10WV Hspa Wi-Fi Router with Voice

Page 20

4.1.1Profile Setup

Your Service Provider will provide the information required to complete the first time setup instructions below. This includes profile, username and password. Only complete those steps for which you have information and skip the others.

1.If your SIM card is not inserted into the gateway, please turn the gateway off. Then insert the SIM and turn the gateway on.

2.Type the APN in the APN field. Authentication Method should be provided by your Internet service provider; or just leave it to AUTO if not acquired. If you have not received the username and password, leave these fields empty.

3.Select IP compression and Data compression to be ON or Off. By default they are set to off.

4.Click the Save button to save the new settings.

5.Press the Connect button to reboot the router and to connect to Internet. After reboot, the Device Info for 3G network box in the WUI Basic screen should indicate an active connection, as shown below. The 3G and Internet LEDs on the front panel of the Router should also be blinking.

.

If the LEDs are off, then either your profile settings are incorrect, the SIM card is not working or the service network is unavailable. In either case, contact Technical Support for further instructions.

NOTE:	If the LEDs light in an on/off pattern moving from left to right this indicates that your SIM is PIN Locked, please lee PIN Lock Off on
	page 21 for instruction on how to fix this

20 – 3G10WV HSPA Wi-Fi Router with Voice

Image 20

Contents 3G10WV Hspa 7.2 Mbps Wi-Fi Router with Voice Important Notice and Safety Precaution PrefaceTable of Contents Appendix a Command Line Interface CLI Commands Via Telnet Introduction Introduction Features Package ContentsAssociated port LED IndicatorsColor Mode Description Rear Panel Quick Setup Quick Setup Setup ProcedureConfigure the router through the Web User Interface WUI Save the router configuration and reboot see sectionWeb User Interface Default Settings Web User InterfaceClick OK to submit the settings TCP/IP SettingsDhcp Mode Login Procedure To login to the web interface, follow the steps belowWeb User Interface Homepage Basic / HomeFollowing table provides further details Fields Description3G Settings This menu includes 3G service Setup and PIN Configuration 3G Settings3G Service Setup 20 3G10WV Hspa Wi-Fi Router with Voice PIN Lock Off PIN ConfigurationPIN Code Protection PIN Lock On PIN Code Change Wireless Wireless Setup Option DescriptionClick Save/Apply to configure the wireless security options SecurityCard. If the Ssid does not match, access is denied AuthenticationWEP Encryption will also be enabled Select SsidConfiguration Broadcast and multicast messages. The default is Default is disabledAP Isolation Point can be linked54g Mode Only modeMbit/s Dsss specification as described in Ieee Std 54g ProtectionDeny Rejects access for the specified MAC addresses MAC FilterMAC Address Can be addedFeature Options Wireless BridgeClick Save/Apply to implement new configuration settings Authorized Lists those devices with authorized access Station InfoIs generated randomly AssociatedManagement Device Settings ManagementUpdate Settings Restore Default38 3G10WV Hspa Wi-Fi Router with Voice Configure Snmp agent on 3G10WV Setting up Snmp agentBy default, Snmp agent is enabled on the gateway Press Save/Apply to activate settingSimple Network Time Protocol Sntp Access Control 42 3G10WV Hspa Wi-Fi Router with Voice Save and Reboot Advanced Setup Advanced Setup This chapter explains advanced setup for your RouterSetting. By default NAT is enabled These options are used for special Dhcp set upHosts connected to Hspa 7.2 Mbps Wi-Fi Router Local Area Network LANEnable Dhcp Enable Dhcp ServerShow up on the same page as below Server RelayNetwork Address Translation NAT Port ForwardingIs selected the port ranges are automatically configured Selected the port ranges are automatically configuredOptions Description External Port EndPort Triggering Demilitarized DMZ Host Trigger Port EndTrigger Protocol TCP, TCP/UDP or UDP Open Port Start Open Port End52 3G10WV Hspa Wi-Fi Router with Voice Options Description MAC address of the PC running the browser Parental ControlUser Name User-defined label for this restriction Routing 56 3G10WV Hspa Wi-Fi Router with Voice DNS Server Configuration Domain Name Servers DNSDynamic DNS Options DescriptionsVoice Configuring your 3G10WV for placing Voice Calls VoiceStatus Status Diagnostics Test DescriptionSystem Log Click View System Log. The results are displayed as follows 3G Status Status Description Status BCS Battery Charge Level StatusQuality Ec/Io Strongest cells Network RegistrationStatistics Interface Shows connection interfacesService Shows the service type Route Select Route to display the paths the Router has foundField Description But may be needed by routing daemonsDynamic Host Configuration Protocol Dhcp ARPClick ARP to display the ARP information Click Dhcp to display the Dhcp informationPing CLI commands Via Telnet CLI commands via Telnet HelpEnd the telnet session Synopsis help ? ExampleDescription Display the 3G network connection status ExamplesWcdma L1 StateL1MFACH RRC State Cellfach RX level dBm-90 Description Display the Imsi and Imei valueSierra show --mode Sierra show --hsdcat !HSDCATSynopsis sierra set --apn profile apn profile 1 Custom APN Sierra show --mode mode UmtsExample Set the Custom APN to test.test Sierra show -auth 1 Profile1 PAP Synopsis sierra set --comp profile type enabledisableExample Enable the IP header compression for Custom APN PIN code configuration Connect / Disconnect PPP sessionSynopsis sierra show --PIN-LOCK Example Sierra set --PIN-CHG 0000Changed the PIN code successfully PUK code unlock Sierra set --PUK 11111111 0000 PUK unlock successfullyOptions Enable WlanValid value 32 characters string --country countryStr Description Set the wireless LAN channel Valid value 0~14Means auto select channel. Default value Default value 0 --mrate rateVal Default value 2346 --dtim dtimIntervalDefault value long ExampleOptions Example Configure wireless LAN MAC filter SynopsisRemove MACaddress Options Description add one MAC Address entry --remove MACaddressDescription set remote bridge MAC address Advance Wlan security wpaGTKRekey =Wlan security WepCurrentKeyindex = 1 --macfilter 92 3G10WV Hspa Wi-Fi Router with Voice Wlan info --config --security --macfilter --wds --station Scenario 6 to configure AP with WPA2 security 3G10WV Hspa Wi-Fi Router with Voice Contact Information