5.4MAC Filter
This screen appears when Media Access Control (MAC) Filter is selected. This option allows access to be restricted based upon the unique
To add a MAC Address filter, click the Add button shown below.
To delete a filter, select it from the table below and click the Remove button.
Option | Description | |
|
| |
MAC Restrict Mode | Disabled – Disables MAC filtering | |
| Allow – Permits access for the specified MAC addresses. | |
| NOTE: | Add a wireless device’s MAC address before clicking the Allow radio button or else you will need |
|
| to connect to the Router’s web user interface using the supplied yellow Ethernet cable and add |
|
| the wireless device’s MAC address. |
| Deny – Rejects access for the specified MAC addresses | |
|
| |
MAC Address | Lists the MAC addresses subject to the MAC Restrict Mode. The Add button prompts an | |
| entry field that requires you type in a MAC address in a | |
| xx:xx:xx:xx:xx:xx where xx are hexadecimal numbers. A maximum of 60 MAC addresses | |
| can be added. | |
|
|
|
Enter the MAC address on the screen below and click Save/Apply.
32 – 3G10WV HSPA