NordicTrack 3G10WV manual Click View System Log. The results are displayed as follows

Option	Description
Log	Indicates whether the system is currently recording events. You can enable or disable
	event logging. By default, it is disabled.
Log level	Allows you to configure the event level and filter out unwanted events below this
	level. The events ranging from the highest critical level “Emergency” down to this
	configured level will be recorded to the log buffer on the Router’s SDRAM. When
	the log buffer is full, the newest event will wrap up to the top of the log buffer and
	overwrite the oldest event. By default, the log level is “Debugging”, which is the lowest
	critical level. The log levels are defined as follows:
	Emergency is the most serious event level, whereas Debugging is the least important.
	For instance, if the log level is set to Debugging, all the events from the lowest
	Debugging level to the most critical level Emergency level will be recorded. If the log
	level is set to Error, only Error and the level above will be logged.
Display Level	Allows you to select the logged events and displays on the View System Log window
	for events of this level and above to the highest Emergency level.
Mode	Allows you to specify whether events should be stored in the local memory, be sent to
	a remote syslog server, or to both simultaneously.
	If remote mode is selected, the view system log will not be able to display events
	saved in the remote syslog server. When either Remote mode or Both mode is
	configured, the WEB UI will prompt the you to enter the Server IP address and Server
	UDP port.

3: Click View System Log. The results are displayed as follows.

3G10WV HSPA Wi-Fi Router with Voice – 65