Qualstar 501440 Rev. G operation manual Table of Contents

Table of Contents

1.	Introduction		1-1
1.1	Who Should Read This Manual		1-1
1.2	Important Safety Information		1-2
2.	Unpacking		2-1
3.	Product Description		3-1
3.1	General Description		3-1
3.2	Models		3-2
4.	FCO Type A Installation		4-1
4.1	Fibre Channel Option (FCO) Type A Installation Considerations		4-1
4.1.1		Operating Environment	4-1
4.1.2		Ventilation	4-1
4.2	Drive Cabling for TLS-5/6/8000 and 58/68/88xxx Libraries		4-1
4.2.1		Drive Cabling	4-1
4.3	Installing a Fibre Channel Option		4-3
4.3.1		Installation	4-3
4.4	Initializing the Fibre Channel Option		4-10
4.5	Configuring the Fibre Channel Loop ID		4-12
4.6	Configuring the Fibre Channel SCSI Devices Interface		4-13
5.	FCO Type B Installation		5-1
5.1	Fibre Channel Option (FCO) Type B Installation Considerations		5-1
5.1.1		Operating Environment	5-1
5.1.2		Ventilation	5-1
5.2	FCO Type B Interconnect Cabling		5-1
5.3	Cabling for TLS-412xxx Libraries		5-3
5.4	Cabling for TLS-58xxx, 68xxx and 88xxx Libraries		5-5
5.5	Securing the Cables to the TLS		5-9
5.6	Initializing the Fibre Channel Option		5-9
5.7	Configuring the Fibre Channel Loop ID		5-11
5.8	Configuring the Fibre Channel SCSI Devices Interface		5-12
6.	FCO Type C Installation		6-1
6.1	Fibre Channel Option (FCO) Type C Installation Considerations		6-1
6.1.1		Operating Environment	6-1
6.1.2		Ventilation	6-1
6.2	FCO Type C Interconnect Cabling		6-1
6.3	Cabling for TLS-4000,TLS-46xxx and TLS-412xxx Libraries		6-4
6.4	Cabling for TLS-5/6/8000 and 58/68/88xxx Libraries		6-8
6.5	Installing a Fibre Channel Option		6-11

501440 Rev. G iii