Raymarine Radar Scanner manual Do not grease the gasket in the pedestal lid

Page 40

32	Pathfinder Radar Scanners

Re-connect to the plug. When correctly fitted the white wire (co- axial) will be at the outer edge of the unit.

6.Connect the red and black power cores. Connect the red cable leads to the terminal sockets marked “+”, and the black cable leads to the terminal socket marked “-”, with one lead in each socket. The terminal clamps are operated using a screwdriver as shown in the inset diagram.

Signal connector

Grey

Purple

Blue Green

Yellow

Orange

Coaxial Screen

(Black)

Coaxial Inner (White)

Power connector

D4576-2

CAUTION:

Do not earth the cable screen to the scanner. The radar system is earthed via the display unit.

7.Using the tie-wrap fitting on the pedestal lid, secure the cable.

8.Check the gasket in the pedestal lid is correctly seated.

Close the pedestal lid, ensuring that the cable does not become trapped. Tighten the four self-retaining bolts.

CAUTION:

Do not grease the gasket in the pedestal lid.

Image 40

Contents Pathfinder Radar Scanners Page Pathfinder Radar Scanners Owners Handbook OctoberPathfinder Radar Scanners Preface Display Software VersionWarranty Contents Appendix a Overview IntroductionEMC installation guidelines This handbook is divided into three chapters as followsConnections to Other Equipment Unpacking and inspecting the components OptionSupplied with For Supplied with Option forSelecting the scanner unit site Radome Scanner Weight Open Array ScannersPathfinder Radar Scanners Mounting surface power boats Mounting surface sailboatsSetting the radiation plane Ideal Radiation PlaneCable runs Rejoining CablesInter-unit cable Scanner Package Inter-Unit CableInter-Unit Cable Scanner Package Radome scanner cables2DE Eur Power cable Radome Scanner Inter-Unit CablesOpen array scanner cables Systems 4 kW scanners only32 V Systems 4 kW scanners Inter-Unit Cable KW Scanners32 V Systems 10kW scanners Power Cable Core Size each core 32 V systemsKW Scanners Pathfinder Radar Scanners Installing the Scanner Connecting the radome scanner inter-unit cable Inner cover White wire Installing the Scanner Pathfinder Radar Scanners Open array scanner Securing the pedestal to the mounting platform Connecting the open array scanner inter-unit cable Heatshrink Heat Shrinking of Wires Do not grease the gasket in the pedestal lid Fitting the open array to the pedestal DC power connection Power ConnectionsSystem connections Grounding the radar systemScanner connection Vessels Device Open Array Systems Radome Supply 10 kWDisplay Front view Display Cable ConnectorScanner Connector Panels Display unit connectionPathfinder Radar Scanners Set up, alignment and timing checks Switch on and initial set upSystem Checks and Alignment EMC ConformanceDisplay timing adjustment Open array position alignmentChecking transmission Bearing alignmentServicing and Safety MaintenanceRoutine Checks Problem Solving Problem CorrectionHow to Contact Raytheon US For Marine Product and Services InformationFor Accessories and Parts For Technical SupportHow to Contact Raytheon Europe For Product Repair and ServiceWorldwide Support Accessories and PartsTechnical Support Pathfinder Radar Scanners 2D 18 Radome Scanner Unit GeneralTransmitter Antenna4D 24 Radome Scanner Unit ReceiverIncluding Low Noise Converter/Limiter & if Receiver 5S and 9S 48 Open Array Scanner Unit Pulse Length/PRFAppendix a Specification 9S Transmitter 10 kWReceiver Noise Figure Less than 5 dB 7S and 11S 72 Open Array Scanner Unit 7S Transmitter 4 kW11S Transmitter 10 kW Appendix a Specification Pathfinder Radar Scanners Index Pathfinder Radar Scanners