42 | Pathfinder Radar Scanners |
equipment, guidelines are given in the installation instructions, to enable you to ensure minimum interaction between different items of equipment, i.e. ensure optimum Electromagnetic Com- patibility (EMC).
•Always report any
•In some installations, it may not be possible to prevent the equip- ment from being affected by external influences. In general this will not damage the equipment but it can lead to spurious resetting action, or momentarily may result in faulty operation.
3.3Problem Solving
All Raytheon products are subjected to comprehensive test and quality assurance programmes prior to packing and shipping. However, if this unit should develop a fault, please refer to the following table to identify the most likely cause and the corrective action required to restore normal operation.
If you still have a problem after referring to the table below, contact your local dealer, national distributor or Raytheon Product Support Department for further advice.
Always quote the product serial numbers. The display unit serial number is printed on the back of the unit, and the scanner serial number is on the back of the scanner near the gland.
Table 3-1: Common Problems and Their Solutions
Problem | Correction |
|
|
“Scanner not responding” | Check that the cable connecting the scanner |
message. | to the radar display unit is firmly attached and |
| undamaged. |
| Check that the polarity of the cables is correct. |
|
|
The bearing displayed on the | Perform the bearing alignment procedure |
radar display is not the same as | described in the display unit Owner’s Handbook |
the actual bearing | Section 8.7. |
|
|
The 72” antenna stops in the | Refer to 72" open array position alignment. |
wrong position. |
|
|
|