Trango Broadband Wireless M5580M-FSU Manual | System Information Overview

Getting Started

System Information (sysinfo) Page

To display system configuration and status information type the command sysinfo at prompt.

[Hardware Version] 5580

[MVC Version] 3893mvc_4p5_050913.arm [Firmware Version] 2p0r8D06011801

[Device ID] 00 01 DE 00 04 47 [Base ID] 1 [AP ID] 1 [SU ID] 1 [System Up Time] 0 day(s) 00:22:51

[Opmode] off [Default Opmode] off [Opmode Start] 30 sec

[IP] 192.168.100.100 [Subnet Mask] 255.255.255.0 [Gateway] 192.168.100.1 [Httpd Port] 80 [Httpd Status] listen

[Telnetd Port] 23 [Telnetd Status] connected

[Telnet Client #1] 192.168.100.111,1093

[Telnet Client #2] 192.168.100.111,1092

[Telnet Client #3] 192.168.100.111,1088

[Telnet Client #4] 192.168.100.111,1087 [Tftpd] disabled

[RF Tx Power] 21 dBm

Channel Table: (MHz)

[Ch#01] 5736 [Ch#02] 5756 [Ch#03] 5776 [Ch#04] 5796 [Ch#05] 5816 [Ch#06] 5836

[Ch#07] 5736 [Ch#08] 5736 [Ch#09] 5736 [Ch#10] 5736 [Ch#11] 5736 [Ch#12] 5736

[Ch#13] 5736 [Ch#14] 5736 [Ch#15] 5736 [Ch#16] 5736 [Ch#17] 5736 [Ch#18] 5736

[Ch#19] 5736 [Ch#20] 5736 [Ch#21] 5736 [Ch#22] 5736 [Ch#23] 5736 [Ch#24] 5736

[Ch#25] 5736 [Ch#26] 5736 [Ch#27] 5736 [Ch#28] 5736 [Ch#29] 5736 [Ch#30] 5736

[Channel Scan Sequence] 5 v [Active Channel] 5 v Disconnected

[Broadcast Packet] on [Auto Scan AP] on [TCP/IP for AP] off [TCP/IP for Local Et h] off

[Remarks] Remarks [ARQ] on

[RF Rx] 0 Kbps [RF Tx] 0 Kbps [Eth Rx] 3 Kbps [Eth Tx] 101 Kbps

[Eth Rx] 51,723 bytes [Eth Tx] 64,975 bytes [RF Rx] 0 bytes [RF Tx] 0 bytes

Success.

Note: Four open Telnet sessions indicated in bold within the sysinfo displayed above For more information, see table #3 below.

Trango Broadband Wireless — M5580M-FSU (Atlas Fox) User Manual Revision 2

page 8