Trango Broadband M5580M-FSU user manual Appendix a Specifications, Data Parameters

Page 33

Appendix B

Specifications

Appendix A Specifications

All specifications apply to M5580M-FSU unless otherwise noted.

Data Parameters

 

Modulation Format

CCK

Certification/Compliance

FCC Part 15.247, 15.407: ETSI/EN301 489-1 (7.2) (pending)

Receiver Sensibility

–83 dBm (1600 byte packet) to –87 dBm (64 byte packet)

EIRP

29dBm (8dBi Internal Antenna

User Data Throughput

10Mbps

Format 10/100 BaseT

10/100 BaseT

Network Protocols

All IEEE 802.3 / 802.3u compliant protocols

Configuration and Management

Telnet, TFTP, HTTP, SNMP (via AP only)

Upstream/Downstream Throughput

CIR/MIR (Control by the AP)

Physical Interfaces

 

Ethernet Speed (via RJ45 shielded)

10/100 BaseT, Auto-sensing

Ethernet Packet

Up to 3600 byte long packets (supports VLAN/VPN pass through)

POWER PARAMETERS

 

Power Method

Power-over-Ethernet (PoE). DC Voltage injected at PoE J-Box

Voltage input limits into PoE J-Box

10.5 VDC - 20 VDC, 20 VDC Nominal

Voltage input limits into Radio

10.5 VDC – 20 VDC

Standard Power Supply (included)

120 VAC to 20 VDC

PoE Cat-5 Max Cable length

100 meters on 24 AWG STP Cat-5 Cable

Current Draw/Power

600 mA max. (12 W), using 20V standard adapter

Environmental

 

Radio Enclosure

All-weather, powder coated, aluminum case/back with UV stabilized ABS radome

Temperature Range

-40°to 60° C (-40°to 140° F)

NEMA Rating

NEMA 4

Radio Dimensions

14.5 in. x 14.5 in. x 3.75 in. (INT) / 6.5 in. x 6.5 in. x 1.5 in (EXT)

Radio Weight

1 Lbs. (45 Kg)

User Interfaces

RJ45 (shielded)

Trango Broadband Wireless — M5580M-FSU (Atlas Fox) User Manual Revision 2

page 29

Image 33
Contents February 13 Revision For Firmware V.2p0r8 Appendix B Warranty Information PrefaceFCC Information Overview Range vs. Throughput System Contents Location of Serial Number & MAC Address Location of RJ-45/LED Port Getting Started Connections and PowerConfiguration Tools Troubleshooting Ethernet ConnectionsTelnet ip address of radio # sysinfo System Information sysinfoEssentials to Establish a Wireless Link ConfigurationAccess Point Basic Settings Key ConceptsSet suid suid Set baseid baseidIpconfig new ip new subnet mask new Set defaultopmode su offPower set dBm Range is Sw 0 on off default is onEstablishing a Wireless Link LEDs Changing IP AddressPower Settings Configure Basic Parameters Using the Http InterfaceConfigure Basic Configure Basic Configure Basic Continuo Deployment & Installation Site SelectionSite survey Channel Planning Rssi Command and Antenna AlignmentRF Link Loopback Test linktest command Mounting Hardware Strain relief and boot installationM5580M-FSU Series SU Wall Mount M5580M FSU / AD5800 -25 Reflector Dish on Pole Weatherizing Cabling and Weather ConsiderationsSnmp Example #tftpd on Firmware Upgrade ProcedureRemarks CommandData Parameters Appendix a Specifications