Trango Broadband M5580M-FSU user manual Configure Basic

Page 20

Using the HTTP Interface

Configure Basic Cont.

Figure 9

Navigation links are shown on the left side of the browser screen. Navigable links include:

System Information

Configuration

Site Survey

Help

The lower left portion of the screen shows the unit’s current opmode, connection, channel, and antenna status. The main body of the System Information displays most of the key parameters. To view description of System Information entries within the radio, click the Help link.

4.Click on Configuration

Figure 9

Trango Broadband Wireless — M5580M-FSU (Atlas Fox) User Manual Revision 2

page 16

Image 20
Contents February 13 Revision For Firmware V.2p0r8 Appendix B FCC Information Warranty InformationPreface Overview Range vs. Throughput System Contents Location of Serial Number & MAC Address Location of RJ-45/LED Port Connections and Power Getting StartedTelnet ip address of radio Configuration ToolsTroubleshooting Ethernet Connections System Information sysinfo # sysinfoConfiguration Essentials to Establish a Wireless LinkAccess Point Basic Settings Key ConceptsSet baseid baseid Set suid suidSet defaultopmode su off Ipconfig new ip new subnet mask newPower set dBm Range is Sw 0 on off default is onEstablishing a Wireless Link Changing IP Address LEDsPower Settings Using the Http Interface Configure Basic ParametersConfigure Basic Configure Basic Configure Basic Continuo Site survey Deployment & InstallationSite Selection Rssi Command and Antenna Alignment Channel PlanningRF Link Loopback Test linktest command Strain relief and boot installation Mounting HardwareM5580M-FSU Series SU Wall Mount M5580M FSU / AD5800 -25 Reflector Dish on Pole Cabling and Weather Considerations WeatherizingSnmp Firmware Upgrade Procedure Example #tftpd onCommand RemarksAppendix a Specifications Data Parameters