Topcom 510, 500, 520 manual User text text?, System param, User to User Signalling UUS

HL_DM5201_GB.qxd 16-04-2003 13:24 Page 37

Deskmaster

13.9 User to User Signalling (UUS)

The ISDN phone can be programmed to automatically release a preprogrammed text message on outgoing calls. This function allows you to send a short message to a phone without establishing a connection. There are 5 fixed, standard texts and 1 user programmable text available.

13.9.1Programming UUS Messages

•Idle state.

• Go to the UUS text menu.

• Select the menu.

• Select the UUS text selection

• Select the function or go the next item. With OK, a previously selected

UUS text will be turned off.

• Scroll through the available texts with the LEFT and RIGHT arrow keys. Select the required text with OK.

• Scroll through the available texts with the LEFT and RIGHT arrow keys. Select the required text with OK.

OR • Select the required text with OK. The selected UUS-Text is activated

• Enter your own text using the keypad.

• The selected UUS-Text is automatically activated

13.10 Least cost routing (LCR function)

Mo.	21 Feb 99	17:26
ISDN
320	UUS Text

UUS Text

321 OFF

UUS Text

322 UUS select text

1 : please call back

2 : please call back tomorrow

Mo.	21 Feb 99	17:26
ISDN

6 : User text text?

6 : User text

The Deskmaster can dial out special carrier prefix before the number, depending of the dialled number. In this way you can automatically route your calls via the cheapest operator. For using the LCR function you need to first dial the digit and then press speaker key or lift the handset. When you first press speaker key or lift the handset and start dialling, it is impossible for the unit to add prefix number.

The required settings for the LCR function:

• Idle state

• Select the menu entry System parameters

Mo.	21 Feb 99	17:26
ISDN

250 System param.

37