HL_DM5201_GB.qxd
Deskmaster
5.8 Special Dialling Procedure
The ISDN telephone supports special dialling procedures that can be used in the ISDN network for example : CUG (closed user groups) or SUB (subadressing).
The keys * and # are used to activate these functions :
•* + 4 digits = dialling with subadres
•# + 2 digits between 01 and 15 = closed user group
•#* + 2 digits between 01 and 15 = closed user group access
Example for CUG dialling :
• Dial number followed by # + 2 digits
•Lift handsets or press handsfree key to dial out
Note :
071183#02
Dialling with subadress or dialling into a closed user group always starts with a number followed by * and/or # key and then the other digits.
5.9 DTMF Dialling
During a connection, the keypad is available for DTMF signals, e.g. to control a distant answering machine. Depending on the key pressed, different tone frequences will be transmitted.
• Connection state.
• Enter the control codes from the dialling keypad (e.g. “1234”)
5.10 D Channel Signalling
07118398261 connected
071183982611234 connected
The Deskmaster allows certain network functions by entering function codes. The system (PBX or net- work) will then respond by sending display messages to the phone or generating audible information. Function codes will always be entered from idle state. The sequence typically starts with the * character and ends with the # character. In between, a sequence of digits and characters may occur.
•Idle state.
•Dial keypad number.
•Lift handset or press hands free key to start sending the D chanel info.
Mo. | 21.Feb 99 | 17:26 |
ISDN
*21*7128375#
• System response
A Message from System
For the details of keypad codes available/required for your special system, please consult the documentation provided by your system supplier.
13